Detailed instructions for use are in the User's Guide.
[. . . ] 161-165 Princes Highway, Hallam Victoria 3803, Australia Phone 03-8787-1200 ALPINE ELECTRONICS GmbH Wilhelm-Wagenfeld-Str. 1-3, 80807 MOnchen, Germany Phone 089-32 42 640 ALPINE ELECTRONICS OF U. K. 50016, 95945 Roissy Charles de Gaulle Cedex, France Phone 01-48638989
ALPINE ITALIA S. p. A. Italy Phone 02-484781 ALPINE ELECTRONICS DE ESPANA, SA Portal de Gamarra 36, Pabell6n, 32 01013 Viloria (Alava)-APDO 133, Spain Phone 945-283588 ALPINE ELECTRONICS (BENELUX) GmbH Leuvensesteenweg 510-B6, 1930 Zaventem, Belgium Phone 02-725-1315
YAMAGATA (Wuxi) Co. , Ltd. [. . . ] If a BLUETOOTH compatible device is not connected, "ID UNSENT" will also be displayed.
Turn the Rotary encoder to select a BLUETOOTH compatible device you want to use (you want to change connection) and then press ~/II/ENT.
· If the connection is successfully changed, "CONNECTED" is displayed for 2 seconds and the 0 indicator lights up, then the display returns to the SETUP screen. · If you input the wrong passcode or communications fail, "FAILED" is displayed. · If you want to connect another BLUETOOTH compatible device, after disconnecting the current BLUETOOTH compatible device, connect the BLUETOOTH compatible device you want to challge to. The PIN code is fixed as "0000".
· Depending on the character type some phone service provider name cannot be displayed. "ID UNSENT" will also be displayed.
Adjusting the volume for the microphone input
You can emphasize or weaken the microphone input volume level.
Setting item: MIC INPUT Turn the Rotary encoder to select the desired volume level (0-7).
· The selling cannot be adjusted during a phone call. Adjust the selling before placing a call.
Selecting the output speaker Setting the Search Mode
You can set whether this unit can be recognized or not from a BLUETOOTH compatible device. Normally set this to VISI MON.
Setting item: VISIBLE M VISI M ON: VISI M OFF: Enable recognition of this unit from the BLUETOOTH compatible device. Disable recognition of this unit from the BLUETOOTH compatible device.
You can select the connected speaker in car to output the sound signal of telephone.
Setting item: SPEAKER SL ALL: F-L: F-R: F-LR: The sound be output from all of speakers in car. The sound only be output from the front right speaker The sound be output from the front left and front right speaker.
· Depending 011 the mobile phone, it may be necessary 10 input a passcode. For inplllting the mobile phone's passcode, refer to the mobile phone's Owner's Manual.
· The selling cannot be adjusted during a phone call. Adjust the selling before placing a call.
Setting the Received Calls automatically (Auto Answer)
When a call is received, you can set whether to receive it automatically or not.
Setting item: AUTO ANS When a call is received, it is answered automatically after about 5 seconds. You can redial these numbers by searching here.
The telephone is redialed.
· Ifvou receive a call/rom an unknown numbel; you cannoT use The redial function To call back.
Setting item: RECEIVED
Dialing a Number In Incoming Missed Call History
Telephone numbers for received calls that are missed, are stored in the Missed List. You can redial these numbers by searching here.
Setting item: MISSED
20-EN
Dialing a Number In The Phone Book
Up to 1, 000 telephone numbers are downloadable from a mobile phone. Dial a call by selecting a person from the phone book list.
Setting item: PHONE BOOK
o
o
o
If a name cannot be obtained via the phonebook, "- - - - - - - - - - " is displayed. The order of the list display depends on the design of the mobile phone. If the call history or phonebook of the mobile phone is added or deleted while it is connected to the unit, the list displayed on the unit may not be brought up to date. Ifit is not updated, you cannot correctly place a call.
I
SOURCEI<!>
~ /II
lENT
Voice Dial Operation
You can call the telephone by performing voice operation.
Controlling USB memory (Optional)
A USB memory device may be connected to this unit. With USB memory connected, playback of files on the device is controlled from this unit.
o
1
Press and hold . . /NOICE DIAL for at least 2 seconds.
The speak mode is activated, and "SPEAK" is displayed.
2
o
Say the telephone number, name you want to call into the microphone.
You can perform this operation only when a voice dial compatible mobile phone is connected. If the mobile phone is not compatible with the voice dial, "NO SUPPORT" is displayed for 2 seconds. The Voice Dialfunction performance depends on the recognition range ofthe mobile phone and mounting location ofthe microphone. If a called person that you say is notfound, "NO CALL" is displayed for 2 seconds. If you place a call via voice dial, you cannot display a phone number or name.
The controls on this unitfor USB memory operation are operative only when a USB memory is connected.
Playing MP3/WMA/AAC Files with the USB memory (Optional)
If you connect a USB memory containing MP3fWMNAAC, you can play these files on this unit.
o
o
o
1
Press SOURCEI<!> to switch to the USB AUDIO mode.
The mode will change every time the bullon is pressed. [. . . ] These limits are designed to provide reasonable protection against harmful inter1erence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter1erence to radio communications. However, there is no guarantee that inter1erence will not occur in a particular installation. If this equipment does cause harmful inter1erence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter1erence by one or more of the following measures: - Reorient or relocate the receiving antenna - Increase the separation between the equipment and receiver. [. . . ]