Detailed instructions for use are in the User's Guide.
[. . . ] E
Digital Camera
EX-P700
User's Guide
Thank you for purchasing this CASIO product. · Before using it, be sure to read the precautions contained in this User's Guide. · Keep the User's Guide in a safe place for future reference. · For the most up-to-date information about this product, visit the official EXILIM Website at http://www. exilim. com/.
K824PCM1DMX
INTRODUCTION
INTRODUCTION
Unpacking
Check to make sure that all of the items shown below are included with your camera. [. . . ] Use [ ] and [ ] to select the setting you
want, and then press [SET].
To get this: High sharpness Normal sharpness Low sharpness Select this setting: +2 +1 0 1 2
136
OTHER RECORDING FUNCTIONS
Specifying Color Saturation
Use the following procedure to control the intensity of the image you are recording.
Specifying Contrast
Use this procedure to adjust the relative difference between the light areas and dark areas of the image you are recording.
1. Select the "REC" tab, select "Saturation", and
then press [ ].
1. Select the "REC" tab, select "Contrast", and
then press [ ].
3. Use [ ] and [ ] to select the setting you
want, and then press [SET].
To get this: High color saturation (intensity) Normal color saturation (intensity) Low color saturation (intensity) Select this setting: +2 +1 0 1 2
3. Use [ ] and [ ] to select the setting you
want, and then press [SET].
To get this: High contrast Normal contrast Low contrast Select this setting: +2 +1 0 1 2
137
OTHER RECORDING FUNCTIONS
Turning the On-screen Grid On and Off
You can display gridlines on the monitor screen to help you compose images and ensure that the camera is straight when recording.
Turning Image Review On and Off
Image review displays the images you record on the monitor screen as soon as you record them. Select the "REC" tab, select "Review", and
then press [ ].
3. Use [ ] and [ ] to select the setting you
want, and then press [SET].
1. Select the "REC" tab, select "Grid", and then
press [ ].
To do this: Display images on the monitor screen for about one second immediately after they are recorded Do not display images immediately after they are recorded
Select this setting: On
3. Use [ ] and [ ] to select the setting you
want, and then press [SET].
To do this: Display the grid Hide the grid Select this setting: On Off
Off
138
OTHER RECORDING FUNCTIONS
Using Icon Help
Icon Help displays guidance text about an icon when you select it on the monitor screen while in a REC mode (page 29). · Icon Help text is displayed for the following functions: current recording mode, flash mode, focus mode, white balance, self-timer/remote controller mode, metering mode. Note, however, that white balance and metering icon help text appears only when "White Balance" or "Metering" is assigned to the [ ] and [ ] keys with the key customization feature (page 140).
IMPORTANT!· Selecting one of the following settings causes the icon and its Icon Help text to appear momentarily on the monitor screen. -- Flash mode (Auto) icon (page 71) -- Focus mode (Auto Focus) icon (page 80) -- White balance AWB (Auto) icon (page 90)
1. Select the "REC" tab, select "Icon Help", and
then press [ ].
3. Use [ ] and [ ] to select the setting you
want, and then press [SET].
To do this: Display guidance text when you select an icon on the monitor screen Turn off Icon Help Select this setting: On Off
139
OTHER RECORDING FUNCTIONS
Assigning Functions to the [ ] and [ ] Keys
A "key customization" feature lets you configure the [ ] and [ ] keys so they change camera settings whenever they are pressed in a REC mode. After you configure the [ ] and [ ] keys, you can change the setting assigned to them without going through the menu screen.
When you want to assign this function to [ ] and [ ] keys: EV shift · [ ] decreases compensation, [ ] increases compensation (page 88). White balance setting · [ ] and [ ] cycle through white balance settings (page 90). ISO sensitivity · [ ] and [ ] cycle through ISO sensitivity settings (page 133). Metering mode · [ ] and [ ] cycle through metering modes (page 135). Select the "REC" tab, select "L/R Key", and
then press [ ].
ISO
Metering
3. Use [ ] and [ ] to select the setting you
want, and then press [SET].
AF Area Off
140
OTHER RECORDING FUNCTIONS
Specifying Power On Default Settings
The camera's "mode memory" feature lets you specify the power on default settings individually for the flash mode, focus mode, white balance mode, ISO sensitivity, AF Area, Metering, Self-timer, Cont. /BKT, Flash Intensity, digital zoom mode, manual focus position and zoom position. Turning on mode memory for a mode tells the camera to remember the status of that mode when you turn off the camera, and restore it the next time you turn the camera back on. [. . . ] 1230 mAh Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 40°C (32°F to 104°F) Dimensions . . . . . . . . . . . . . . . . . . . . . . . . 38. 5(W) × 38. 0(H) × 9. 3(D) mm (1. 5(W) × 1. 5(H) × 0. 37(D)) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approximately 34 g (1. 20 oz)
I Rapid Carger (BC-30L) : Plug-in Type
Power Requirement . . . . . . . . . . [. . . ]