Detailed instructions for use are in the User's Guide.
[. . . ] E
Digital Camera
EX-Z750
User's Guide
Thank you for purchasing this CASIO product. · Before using it, be sure to read the precautions contained in this User's Guide. · Keep the User's Guide in a safe place for future reference. · For the most up-to-date information about this product, visit the official EXILIM Website at http://www. exilim. com/.
K842PCM1DMX
INTRODUCTION
INTRODUCTION
Unpacking
Check to make sure that all of the items shown below are included with your camera. [. . . ] -- -- -- -- -- -- EV Shift (page 83) White Balance (page 84) ISO (page 125) Metering (page 126) Self-timer (page 69) Off: No function assigned
120
OTHER RECORDING FUNCTIONS
Turning the On-screen Grid On and Off
You can display gridlines on the monitor screen to help you compose images and ensure that the camera is straight when recording.
Turning Image Review On and Off
Image review displays the images you record on the monitor screen as soon as you record them. Select the "REC" tab, select "Review", and
then press [ ].
3. Use [ ] and [ ] to select the setting you
want, and then press [SET].
1. Select the "REC" tab, select "Grid", and then
press [ ].
To do this: Display images on the monitor screen for about one second immediately after they are recorded Do not display images immediately after they are recorded
Select this setting: On
3. Use [ ] and [ ] to select the setting you
want, and then press [SET].
To do this: Display the grid Hide the grid Select this setting: On Off
Off
121
OTHER RECORDING FUNCTIONS
Using Icon Help
Icon Help displays guidance text about an icon when you select it on the monitor screen while in a REC mode (page 27). · Icon Help text is displayed for the following functions: -- Flash mode, focus mode, white balance, self-timer, metering. Note, however, that metering, self-timer and white balance icon help text appears only when "Metering", "Self-timer" or "White Balance" is assigned to the [ ] and [ ] keys with the key customization feature (page 120).
3. Use [ ] and [ ] to select the setting you
want, and then press [SET].
To do this: Display guidance text when you select an icon on the monitor screen. · Selecting one of the following settings causes the icon and its Icon Help text to appear momentarily on the monitor screen. -- Flash mode " Auto Flash" icon (page 64) -- Focus mode " Auto Focus" icon (page 74) -- White balance " AWB Auto WB" icon (page 84)
1. Select the "REC" tab, select "Icon Help", and
then press [ ].
122
OTHER RECORDING FUNCTIONS
Specifying Power On Default Settings
The camera's "mode memory" feature lets you specify the power on default settings individually for the flash mode, focus mode, white balance mode, ISO sensitivity, AF Area, metering, self-timer, flash intensity, digital zoom mode, manual focus position and zoom position. Turning on mode memory for a mode tells the camera to remember the status of that mode when you turn off the camera, and restore it the next time you turn the camera back on. When mode memory is turned off, the camera automatically restores the initial factory default setting for the applicable mode. -- The following table shows what happens when you turn mode memory on or off for each mode.
Function Flash Focus*1 White Balance ISO AF Area Metering Self-timer Flash Intensity Digital Zoom
On
Off Auto Auto Auto Auto Spot Multi Off 0 On Last Auto Focus position that was in effect before you switched to manual focus Wide
Setting when camera is turned off
MF Position
Zoom Position*2
*1 The focus mode setting is not remembered for the Movie mode. *2 Only the optical zoom position is remembered.
123
OTHER RECORDING FUNCTIONS
1. Select the "REC" tab, select "Memory", and
then press [ ].
IMPORTANT!· Note that BEST SHOT mode settings take priority over mode memory settings. If you turn the camera off while in the BEST SHOT mode, all settings except for "Zoom Position" will be configured according to the BEST SHOT sample scene when you turn it back on again, regardless of mode memory on/off settings. · In the following modes, " " (Flash Off) is always selected as the flash mode regardless of mode memory on/off setting. Movie mode, Short Movie mode, Past Movie mode, MOVIE BEST SHOT mode
3. Use [ ] and [ ] to select the item you want to
change, and then press [ ].
4. Use [ ] and [ ] to select the setting you
want, and then press [SET].
To do this: Turn on mode memory so settings are restored at power on Turn off mode memory so settings are initialized at power on Select this setting: On Off
124
OTHER RECORDING FUNCTIONS
Specifying ISO Sensitivity
You can change the ISO sensitivity setting for better images in places where lighting is dim or when you are using faster shutter speeds. [. . . ] Approximately 30 seconds maximum per image Voice Recording . . . . . . . . . . . . . . Approximately 25 minutes with built-in memory After Recording . . . . . . . . . . . . . . . Approximately 30 seconds maximum per image Monitor Screen . . . . . . . . . . . . . . . . . . 2. 5-inch TFT color LCD 115, 200 pixels (480 × 240) Viewfinder . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]