User manual ELECTROLUX ESL6391RA

[. . . ] Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge use the appliance. They must have supervision or instruction for the operation of the appliance by a person who is responsible for their safety. Keep children and pets away from the Do not install or use a damaged appli- Do not install or use the appliance Where the temperature is less than 0 °C. Make sure that the appliance is installed below and adjacent to safe structures. [. . . ] If the option is applicable to the programme, the related indicator comes on. If the option is not applicable to the programme, the related indicator flashes quickly 3 times and then goes off. This option decreases the temperature in the last rinse phase and the duration of the drying phase. The use of this option decreases the energy consumption (up to 25%) and the programme duration. How to activate the EnergySaver option If the option is applicable to the programme, the related indicator comes on. If the option is not applicable to the programme, the related indicator flashes quickly 3 times and then goes off. Press and hold the TimeSaver and the EnergySaver buttons at the same time until the Multitab indicator comes on. Press and hold the TimeSaver and the EnergySaver buttons at the same time until the Multitab indicator goes off. If you stop to use the combi detergent tablets, before you start to use separately detergent, rinse aid and dishwasher salt, do these steps: 1. Set the water softener to the highest Make sure that the salt container and The rinse aid dispenser are full. Start the shortest programme with a Rinsing phase, without detergent and without dishes. The acoustic signals operate when the appliance has a malfunction or when the adjustment of the level of the water softener occurs. There is also an acoustic signal that operates when the programme is completed. By default, this acoustic signal is off but it is possible to activate it. Press the on/off button to activate the Make sure that the display shows the programme P1. If the display shows a different programme, press and hold the Reset button until P1 shows in the display. Press and hold, at the same time, buttons (4) and (5) until the indicators of buttons (3), (4) and (5) start to flash. The indicator of button (5) continues The display shows the current set- Press the on/off button to deactivate the appliance and to confirm the setting. Make sure that the set level of the water softener agrees with the water hardness in your area. Contact your local water authority to know the water hardness in your area. If the display shows a different programme, press and hold the Reset button until P1 shows in the display. Press and hold function buttons (4) and (5) at the same time until the indicators of buttons (3), (4) and (5) start to flash. [. . . ] The programme is without a drying phase or with a low temperature drying phase. The quality of the rinse aid can be the The quality of the combi detergent tab- Lets can be the cause. Try a different brand or activate the rinse aid dispenser and use rinse aid together with the combi detergent tablets. The activation of the rinse aid dispenser can occur only with the Multitab option activated. [. . . ]