User manual GRUNDIG AUDIORAMA 9000

[. . . ] Do not place any containers containing liquids, such as vases, on the loudspeakers, as they may tip over and spill the liquid, which poses an electrical hazard. Do not place any objects such as burning candles on the Audiorama 9000. [. . . ] 3 Shorten the loudspeaker cable to the required length, separate the wires approx. 4 Slide the cover onto the loudspeaker and guide the loudspeaker cable with steel cable through the opening of the mounting plate. 5 Put the steel cable through the opening of the locking screw and tighten it with a spanner (min. 2. 5 Nm). 10 MOUNTING -----------------------------------------------------------------------------------------6 Screw the mounting plate over the spacers with three suitable screws. 7 Using the terminal strip (2. 5 mm2), bind the loudspeaker cable and its extension to the amplifier. The cross-section of the loudspeaker cable extension used must have a certain ratio to the cable length. We therefore recommend a cross-section of at least 1. 5 mm2 for cable lengths under 10 meters and a cross-section of at least 2. 5 mm2 for lengths over 10 meters. If you use cross-sections of > 2. 5 mm2, reducers can be obtained from your dealer. 8 If necessary, cut a section out of the covering for the loudspeaker cable. Loose loudspeaker cables pose an accident hazard. Setting up the Audiorama 9000 with a stand support As an alternative to mounting the Audiorama 9000 on the ceiling, you can also set it on a stand support. Mounting the stand support may only be carried out by an authorised dealer. [. . . ] Take it to a collection point for recycling electrical and electronic devices. The symbol on the product, in the operating manual or on the packaging indicates recyclability. [. . . ]