User manual GRUNDIG WT-AV 1
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual GRUNDIG WT-AV 1. We hope that this GRUNDIG WT-AV 1 user guide will be useful to you.
You may also download the following manuals related to this product:
GRUNDIG WT-AV 1 (750 ko)
GRUNDIG WT-AV 1 (756 ko)
GRUNDIG WT-AV 1 (757 ko)
GRUNDIG WT-AV 1 (747 ko)
Manual abstract: user guide GRUNDIG WT-AV 1
Detailed instructions for use are in the User's Guide.
[. . . ] With the radio transmission system WT-AV 1, you can transmit picture and sound signals from devices which are connected to your television in your living room to an LCD screen or a second television set up, for example, in another room. The device which provides the signals can be, for example, a DVD player, a satellite receiver or a video recorder.
Transmitting television signals
With the remote control of the device putting out the signals (e. g. For the transmission of remote control signals the infra-red signals of the remote control are transformed into radio signals in the receiver. The transmitter transforms the radio signals back into infra-red signals and transmits them via the infra-red module to the appropriate device, which is also used for the transmission of picture and sound signals. [. . . ] The antenna must be positioned upright in order to function properly.
2 3
Display on the front. R-AUDIO-L OUT VIDEO OUT CH Audio signal output for the audio signals of the device being used. The switch for the selected channel must be set to » DIP ON«. ON/OFF switch.
4 5 6
7 8
DC 9V@
G
16
CONNECTION ______________________________________
Connecting the WT-AV 1 Transmitter
CH
8
Xenaro
ANT IR R · AUDIO · L IN VIDEO IN
I
2
DIP
3
ON
4
3
CH
I 2 3 4
DC 9V
DIP ON
4 5
2
6
7
1
Note: Use the cinch/EURO-AV cable labelled "for Transmitter". 1 Insert the EURO-AV plug of the cable in the EURO-AV socket of the signal source (e. g. 2 Insert the cinch plug of the cable in the cinch socket of the transmitter. Yellow video signal, red audio signal right, white audio signal left. 3 On the channel switch » CH« select a transmission channel by sliding a switch into the » DIP ON« position. 4 Insert the jack plug of the infra-red module into the » IR« socket.
I
2
DIP
3
ON
4
5 Remove the protective film of the adhesive tape from the infra-red receiver and attach the infra-red receiver to the infra-red sensor of the signal source (e. g. Note: For the correct position of the infra-red sensor of the signal source, see the operating instructions for the signal source you are using. When attaching the infra-red receiver, make sure that the infra-red sensor of the signal source is not completely covered. This might make direct operation of the device via remote control impossible. 6 Insert the mains adapter plug into the » DC 9V@« socket. 8 Position the antenna upright.
17
ENGLISH
CONNECTION ________________________________________
Connecting the WT-AV 1 Receiver to the TV
CH
6
I
2
DIP
3
ON
4
3
ANT
R · AUDIO · L OUT VIDEO OUT
I
CH
2 3 4
DC 9V
DIP ON
2
4
5
EURO-AV
1
3 2 1 4 7 5 8 0 6 9
Note: Use the cinch/EURO-AV cable labelled "for Receiver". 1 Insert the EURO-AV plug of the cable in the EURO-AV socket on the television set. 2 Insert the cinch plug of the cable in the cinch socket of the receiver. Yellow video signal, red audio signal right, white audio signal left. 3 On the channel switch » CH« select a transmission channel by sliding a switch into the » DIP ON« position. The other switches must remain in the upper position.
I
2
DIP
3
ON
4
Note: Then transmission channel set must be the same as that which was set for the transmitter. 4 Insert the mains adapter plug into the » DC 9V@« socket. [. . . ] These products fulfil the European directives 89/336/EEC and 73/23/EEC. This device conforms to the safety regulation DIN EN 60065 (VDE 0860) and thus the international safety regulation IEC 60065. Gebouw Amstelveste Joan Muyskenweg 22 NL-1096 CJ Amsterdam +31/20-5 68 15 68 GRUNDIG ITALIANA S. P. A. Trener, 8 I-38100 Trento +39/4 61-89 31 11
DECLARATION OF CONFORMITY
GRUNDIG AG Beuthener Str. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE GRUNDIG WT-AV 1
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual GRUNDIG WT-AV 1 will begin.