User manual HONEYWELL ES800

[. . . ] When the set time has passed, the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged from electrical socket). SWING Press the button until the SWING indicator light is illuminated on the display screen. Com manuals search engine EN 2 USE & OPERATION (CONTINUED) REMOTE CONTROL Power Fan Speed Swing Cool Timer QuietSleepTM / TurboBlastTM : ON / OFF : Low / Medium / High / Auto : Controls the motion of the louvers : Evaporative cooling on/off : Controls the Timer function for automatic off : QuietSleepTM / TurboBlastTMmode Y L N O W IE V E R P COOLER LOCATION Make sure to position the air cooler correctly before you set up and start using the product. Please refer to the COOLER LOCATION section of the separate Safety & Maintenance Guide. [. . . ] If ice is available, you may add ice in the top ice compartment to enhance the cooling performance. Front water ?ll door for easy tank re?ll O W IE V E R P WATER FILTER* Some models are equipped with a water ?lter in the tank, which helps to ?lter dust, hair and other particles from entering the water tank. Note: The water capacity refers to the total volume of water that can be contained within the air cooler water tank and water distribution system. indicator level may be lower than the actual water capacity of the air cooler. Water Filter Y L N Ice Compartment Filter Cup To clean the water ?lter, simply push the bottom of the ?lter cup upwards to release from the ?lter frame. Remove dust and hair from the ?lter sponge and rinse under clean water. When clean, replace the sponge and secure the ?lter cup back into the frame. AUTO-OFF SAFETY SYSTEM This unit is equipped with an Auto-Off Safety System. When the water tank is detached from the unit or if the tank is incorrectly positioned, the air cooler will turn off automatically. To restart the cooler, the tank must be attached to the unit correctly. Com manuals search engine EN 4 USE & OPERATION (CONTINUED) LOW WATER ALARM* The unit is equipped with a low water sensor. In Cooling Mode, when water in the tank is below the minimum level, you will hear a beeping sound and the indicator light will ?ash continuously. To deactivate the alarm and continue using the unit as a fan (without evaporative cooling), switch the unit OFF and then ON again. The Low Water Alarm will sound again if the COOL function is activated while the water tank is still empty. WATER LEVEL INDICATOR LIGHT O W IE V E R P CLEANING & DRAINING THE WATER TANK When the unit turns on, the water level indicator located at the front of the water tank will light up to produce an elegant glow. If the cooler will not be used for a long period of time, please refer to the STORAGE & MAINTENANCE GUIDELINES located in the separate Safety & Maintenance Guide. Y L N WARNING: Before cleaning the unit, switch the unit OFF and disconnect the power adapter from the unit and electrical socket. Carefully remove the Water Tank Filter* (if your unit has this) from the tank. [. . . ] Draining the water tank and re?lling with fresh water at least once a week will help reduce mineral deposits. If mineral deposits remain on the Honeycomb Cooling Media, the media should be removed and washed under fresh water. The media should be cleaned every two months or sooner, depending on your needs. For best results allow the Honeycomb Cooling Media to dry after each use by turning off the cool function 15 minutes before turning the unit off. [. . . ]