User manual HUBBELL LIGHTING NRG-200
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HUBBELL LIGHTING NRG-200. We hope that this HUBBELL LIGHTING NRG-200 user guide will be useful to you.
Manual abstract: user guide HUBBELL LIGHTING NRG-200
Detailed instructions for use are in the User's Guide.
[. . . ] This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. b Notice · If static electricity or electromagnetic interference causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the USB cable again.
2
For customers in the U. S. A.
If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-HUBBELL LIGHTING (7669) The number below is for FCC related matters only. Regulatory Information
Declaration of Conformity
Trade Name: HUBBELL LIGHTING Model No. : NRG-200 Responsible Party: Sony Electronics Inc. Telephone No. : 201-930-6972 This device complies with Part 15 of the FCC Rules. [. . . ] Your camcorder will shoot a still image at a selected interval and record it on a "Memory Stick. "
[a] [b] [a] [b] [a]
a: Shooting time b: Interval
1 Touch . 2 Select a desired interval time (1, 5 or 10 minutes), then touch 3 Touch [ON], then touch .
GOFF ON ( ) To deactivate interval recording.
.
To record still images on a "Memory Stick" in the selected interval.
4 Touch
. flashes.
5 Press PHOTO fully.
stops flashing and the Interval photo recording starts. To cancel interval photo recording, select [OFF] in step 3.
DEMO MODE
When you remove a cassette and "Memory Stick" from your camcorder, and select the CAMERA-TAPE mode, you can view the demonstration in about 10 minutes.
GON OFF Select to see an overview of the functions available such as when you are using this camcorder for the first time. Select when you do not intend to use the DEMO MODE.
b Note · You cannot view the demonstration only when the NIGHTSHOT PLUS switch is set to ON. z Tips · The demonstration will be suspended in situations such as those described below. (The demonstration starts again in about 10 minutes. ) When a cassette or "Memory Stick" is inserted. · If [A. SHUT OFF] is set to [5 min] when the camcorder is used on the battery pack, the power will be turned off after approximately 5 minutes (p. 81).
PRINT
See page 101 for details.
72
Using the Menu
Using the (EDIT/ PLAY) menu END SEARCH/
TITLE, etc.
You can select items listed below on the EDIT/ PLAY menu. The settings you can adjust vary depending on
the power mode of your camcorder. Unavailable items will be grayed out.
60min 0:00:00:00
EDIT/PLAY
VAR. · When you superimpose a title while you are recording, the beep does not sound. z Tip · To change a created title, select the title in step 1, then touch characters again.
. Then, reselect the
Using the Menu
Using the Menu
75
Using the (STANDARD SET) menu REC MODE/MULTISOUND/AUDIO MIX/USB-CAMERA, etc.
You can select the items listed below on the STANDARD SET menu. The settings you can adjust
vary depending on the power mode of your camcorder. Unavailable items will be grayed out.
60min STBY 0:00:00
STANDARD SET
REC MODE AUD IO MODE LCD SET
OK
REC MODE
GSP ( SP ) LP ( LP ) Select to record in the SP (Standard Play) mode on a cassette. Select to increase the recording time to 1. 5 times the SP mode (Long Play). The use of Sony cassette is recommended to get the most out of your camcorder.
b Notes · If you record in the LP mode, a mosaic-like noise may appear or sound may be interrupted when you play back the tape on other camcorders or VCRs. · When you mix recordings in the SP mode and in the LP mode on one tape, the playback picture may be distorted or the time code may not be written properly between the scenes.
AUDIO MODE
G12BIT 16BIT ( ) Select to record in the 12-bit mode (2 stereo sounds). Select to record in the 16-bit mode (1 stereo sound with high quality).
b Note · For NRG-200: You cannot select AUDIO MODE when you dub tapes recorded in the Digital8 system to another VCR. However, you can select AUDIO MODE when you dub tapes recorded on other devices in the Hi8 /standard 8 mm system to another VCR, via the DV Interface.
VOLUME
See page 46, 49 for details.
MULTI-SOUND
You can select how to play back audio recorded on a tape in stereo mode. Select the desired mode when you play back a Digital8 system tape which is dubbed from a dual sound track tape recorded in the DV system.
76
Using the Menu
For NRG-200: Select the desired mode when you play back a Hi8 /standard 8 mm system tape recorded on other devices in a dual sound track of the AFM HiFi stereo system.
GSTEREO 1 Select to play back a stereo tape with stereo sound or dual sound track tape with main and sub sound. [. . . ] 57) E Video control buttons (Rewind, Playback, Fast-forward, Pause, Stop, Slow) (p. 57) G Transmitter After turning on your camcorder, point towards the remote sensor to control your camcorder. 57)
* These buttons are not available during Easy Handycam operation.
2 Remove the button-type lithium battery.
Quick Reference
3 Place a new button-type lithium battery
with the + side facing up.
4 Insert the battery case back into the
Remote Commander until it clicks.
, continued
Quick Reference
129
WARNING
Battery may explode if mistreated. Replace only with the same or equivalent type recommended by the manufacturer. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HUBBELL LIGHTING NRG-200
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HUBBELL LIGHTING NRG-200 will begin.