User manual HUMAX HD-FOX IR
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HUMAX HD-FOX IR. We hope that this HUMAX HD-FOX IR user guide will be useful to you.
You may also download the following manuals related to this product:
HUMAX HD-FOX IR (4044 ko)
Manual abstract: user guide HUMAX HD-FOX IR
Detailed instructions for use are in the User's Guide.
[. . . ] HD Digital Receiver
The default password is 0000.
User's Manual
HD-FOX IR
Notice
Thank you for purchasing a HUMAX product. Please read this user's manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user's manual next to your product for future reference. The information in this user's manual is subject to change without notice.
Copyright (Copyright © 2008 HUMAX Corporation)
Not to be copied, used or translated in part or whole without HUMAX's prior consent in writing except approval of ownership of copyright and copyright law.
Warranty
The warranty does not cover parts which may become defective due to misuse of the information contained in this manual.
Trademarks
· · Irdeto is a trademark of Irdeto Access B. V. [. . . ] Select OK and press the OK button to reset all values saved at motor antenna to factory default. Note: Reset may not activate depending on the condition of the antenna. Search Channels
Satellite
Select All or the name of the satellite in antenna setting.
Transponder
Select All or the value in the transponder list and press the OK button. If the required value is not available, select User Define and enter the transponder value directly.
Network Search
Select Disable or Enable using the OK or / button.
Scrambled Type
Select among All, FTA and CAS and press the OK button.
Channel Type
Select among All, TV and Radio and press the OK button. Note: If there are no channels available, a message indicating the result will pop up.
GB66
User's Manual
9. Installation
9. 4 Antenna Setting [SMATV]
MENU Installation Antenna Setting [SMATV] 1. Note: Enter the frequency from 950 to 2150MHz.
Symbol Rate(1)-(4)
1. If the required value is not available, select User Define and enter the symbol rate directly. To stop the search, press the OK button during channel search.
GB67
User's Manual
9. Select Frequency and enter the frequency using the NUMERIC(0-9) buttons. If the required value is not available, select User Define and enter the symbol rate directly.
Transmission
Select DVB or DVB-S2 and press the OK button.
Modulation
Select QPSK or 8PSK and press the OK button.
FEC
1. Note: If there are no channels available, a message indicating the result will pop up.
GB68
User's Manual
9. Installation
9. 5 IRDETO Software Update
You can update the IRDETO software. Select IRDETO Software Update using the / button and press the OK button. Note: IRDETO Software Update is activated only when OTA is available.
9. 6 Software Update
Software Update allows you to update the system software. Select Software Update using the / button and press the OK button.
1. When new software is detected, you can choose to download the software immediately or save for later. When there is no new software to update, a popup will appear.
GB69
User's Manual
9. Enter the values for Satellite, Frequency, Polarisation, Symbol Rate and FEC. When new software is detected, you can choose to download the software immediately or save for later. Note: When there is no new software to update, a popup will appear.
Satellite
Select the name of the satellite in antenna setting.
Frequency
Enter the frequency using the NUMERIC(0-9) buttons.
Polarisation
Select one option among Auto, Horizontal and Vertical and press the OK button.
Symbol Rate
Select one option among 27500, 26000 and 22000 and press the OK button. If the required value does not exist, select User Define and enter the symbol rate directly.
Transmission
Select DVB or DVB-S2 and press the OK button.
Modulation
Select QPSK or 8PSK and press the OK button.
FEC
Select one option among Auto, 1/2, 2/3, 3/4, 5/6 and 7/8 and press the OK button.
GB70
User's Manual
9. [. . . ] If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HUMAX HD-FOX IR
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HUMAX HD-FOX IR will begin.