User manual HUMAX IR-5410ZPLUS

[. . . ] Digital Set-Top Box with Irdeto Embedded Contents Safety Copyright & Glossary Reference STB Connections Remote Control Unit Guide of Functions Guide of Main Menu Motorised System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB37 ~ GB40 Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GB45 ~ GB46 Specification GB1 Safety This STB has been manufactured to satisfy the international safety standards. MAINS SUPPLY OVERLOADING LIQUIDS CLEANING VENTILATION : 190 - 250 V AC 50/60 Hz : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. [. . . ] Sleep Time Depending on Time Setting, select the time when STB is turned off. GB21 A/V Output Setting Video Output(CVBS/S-Video/RGB) Set the video mode for the TV SCART output. Audio Output Set the audio mode which is output from the RCA/Cinch Jack or SCART. (Stereo/Mono) Dolby Digital lf Dolby Digital option is ON and the broadcaster provides the Dolby Digital stream, the Dolby Digital audio language is firstly selected when changing the service. Screen Mode Select the aspect ratio of TV which is connected to STB(4:3 or 16:9). Display Format Select the format which the video is to be displayed on screen. When your TV set is 4:3 and video source is 16:9, STB will display in Letter-box or Centre mode as selected. When your TV set is 16:9 and video source is 4:3, STB will display in the Pillar-box or Full mode as selected. NTSC Mode Adjust this value between 3. 58 and 4. 43 if your TV displays the video only in black and white color. Normally NTSC 3. 58 mode is used worldwide, but some TV sets can support only NTSC 4. 43 mode. GB22 Guide of Main Menu UHF Tuning You select the STB output by using the UHF channel. The range of channels and frequency value are different for each PAL Standard: PAL I/G for Europe : CH21 ~ CH69 PAL B for Europe/Australia : CH28 ~ CH69 PAL D for China : CH13 ~ CH62 PAL K for Russia : CH21 ~ CH69 PAL Standard Select a PAL Standard according to the above range of channels. The Offset ranges from -4 to +4 and each Offset represents 1MHz. GB23 Other Setting Select the OSD Transparency, Information Box Display Time and so on. It affects Information box, Soundtrack, Subtitle, Service list, Time and Quick mode of TV Guide. Box Display Time Set the display duration of Information box displayed on the screen after changing services. Menu Background Set the type of background for the menu to be displayed on. Changing to Reserved Service When the reserved time has come during the view of services: · Manual Mode This mode shows the message "A reserved event has started on another service. (will automatically change after 10 seconds. )" And ask the presence of change and then makes a change. · Auto Mode The current service will be automatically changed to the time-reserved service. GB24 Guide of Main Menu 4-2. Service Organising This menu gives users access to options that allow them to organise their TV Services, Radio Services and Networks. Organise TV Services Organise All Services This mode allows users to Delete, Move, Lock, Skip and Rename TV Services. Press the GREEN( )button to move the service to where you want to locate. Then, the symbol " " will be displayed at the right side of the service name. Then, the symbol " " will be displayed at the right side of the service name. [. . . ] When using the Movement option for fine-tuning, you must remember to store the changes you have made or else these will be lost. Searching for services on your selected satellite Once you have moved the motor into position, you can search for the channels transmitted from the relevant satellite. To search for services on your new selected satellite, Do as follows ; 1. Select the service searching from the Main Menu and press the OK button. [. . . ]