User manual HUMAX L3040
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HUMAX L3040. We hope that this HUMAX L3040 user guide will be useful to you.
Manual abstract: user guide HUMAX L3040
Detailed instructions for use are in the User's Guide.
[. . . ] 3601 West Garry Ave Santa Ana, CA 92704 www. humaxusa. com
A L
2
Important Safety Instructions
CAUTION :
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. It is dangerous to make any kind of contact with any inside part of this device.
This symbol alerts you that important literature concerning operation and maintenance has been included with this device.
WARNING :
DO NOT EXPOSE THIS DEVICE TO DRIPPING OR SPLASHING, OR PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THIS DEVICE.
FCC NOTICE
A Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used according to the instructions, may cause harmful interference to radio communications. [. . . ] When you press the buttons you have set to PUNCH mode, the product name will show along with the PUNCH icon in the product indication window. To stop the PUNCH setup process, press the CANCEL button.
PUNCH
PUNCH
PUNCH
PUNCH
22
Reset
How to Reset the Remote Control
Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear).
PUNCH
The MBR icon will appear and blink. The remote control will return to its initial state.
23
Basic operation
Turning the LCD TV On and Off
1 2 3
Connect the Power Cord to the AC input on the back of your LCD TV. The LED lamp will change to light off and your LCD TV will be turned on. Indicator Lights Status Standby Mode Power On Power Saving Lamp Blue Light off Flickering ) button
4
Viewing the OSD Menu
1
With the power on, press the MENU ( ) button on the remote control. ) button to select the sub-menu.
2 3
Use the SEL (
The OSD(On-Screen Display) disappears automatically after a few seconds without pressing other buttons or you can also press the MENU button to return to the previous menu or press the MENU button once or more to exit the OSD.
24
Basic operation
Displaying Status Information
1
With the OSD, press the INFO button on the remote control. The LCD TV will display the external source, Picture Mode, Aspect Ratio, Clock and Video type.
Selecting your Language
When the LCD TV is initially powered ON, you must select the language in which to display all on-screen menus.
1 2 3
Press the MENU button.
or Press the press the SEL (
button to select the OSD ( ) icon; then ) or button to select the Language.
Select the appropriate language by pressing the button repeatedly. You can choose one of 9 languages.
or
After adjustment: Press the MENU button to exit.
25
Channel
Setting up Channels Automatically
Your LCD TV can memorize and store all of the available channels for both "TV(antenna) and cable channels. Therefore you must specify the type of signal source that is connected to the LCD TV.
1 2 3 4
Press the MENU button.
Channel Channel Mode Auto Program LNA TV Pro Off Added 0
Press the or button to select the Channel ( ) icon; then press the SEL ( ) or button to select Channel Mode.
Channel Memory Fine Tune
Move
Select
Exit
Press the
or
button to select the option ( TV or CATV ).
Channel Channel Mode Auto Program TV Pro Off Added 0
Press the or button to select Auto Program; then press the SEL ( ) or button. To stop the search before it has finished, press MENU button.
LNA Channel Memory Fine Tune
Move
Select
Exit
Channel Channel Mode Auto Program TV Pro Off Added 0
After adjustment: Press the MENU button to exit.
LNA Channel Memory Fine Tune
Quick Way
Press the AUTO button on the remote control.
Move
Select
Exit
Adding and Erasing Channels
1 2
Select channel that you wish to add or erase by directly pressing the numeric buttons on the remote control. Repeatedly pressing this button will alternate between Added and Erased. Erased Channel : display in Yellow.
TV 10 Added
TV 10 Erased
26
Channel
Using the LNA(Low Noise Amplifier)
If the LCD TV is operating in a weak-signal area, sometimes the LNA function can improve the reception.
1 2 3 4
Press the MENU button.
Channel Channel Mode Auto Program TV Pro Off Added 0
Press the button to select the Channel ( or then press the SEL ( ) or button.
) icon;
LNA Channel Memory Fine Tune
Press the
or
button to select to the LNA.
Move
Select
Exit
Channel Channel Mode Auto Program TV Pro Off Added 0
Press the
or
button to select On or Off.
LNA Channel Memory Fine Tune
Move
Select
Exit
Channel Channel Mode Auto Program LNA Channel Memory Fine Tune TV Pro On Added 0
After adjustment: Press the MENU button to exit.
Move Select Exit
Fine Tuning Channels
If the reception signal is weak or distorted, you can adjust channel to manually using the fine tuning.
1 2 3 4
Press the MENU button.
Channel Channel Mode Auto Program TV Pro Off Added 0
Press the or button to select the Channel ( then press the SEL ( ) or button.
) icon;
LNA Channel Memory Fine Tune
Press the
or
button to select the Fine Tune.
Channel
Move
Select
Exit
Press the
or
button to adjust the Fine Tuning.
Channel Mode Auto Program LNA Channel Memory Fine Tune
TV Pro Off Added 16
Move
Select
Exit
After adjustment: Press the MENU button to exit.
27
Direct Access Features
Selecting Channels
Using the Channel Buttons
1
Press the CH or CH button to selecting channels. When you press the or button, the LCD TV changes channels in sequence. But you will not see channels that were either erased or not memorized.
Using the Direct Access Buttons
1
Press the numeric buttons to select directly to a channel. Two digit channel selection: For example, to select channel 36, press 3 then 6. Three digit channel selection: For channel 115, press 1, then 1, then 5 or press 100 button and then 1, then 5.
After adjustment: Press the MENU button to exit.
Using the FAV button to select the previous channel
1
Press the FAV button on the remote control. The LCD TV will switch to the last viewed channel.
Adjusting the Volume
1
Press the VOL+ or VOL- button to increase or decrease the Volume on the remote control.
50
Switching the Sound Off Temporarily
You can temporarily cut off the sound using the Mute button.
1 2
Press the MUTE button on the remote control. When you wish to turn the sound back on, press the MUTE button again.
Mute
28
Direct Access Features
Selecting a Device from External Sources
You can select the favorite signal from connected external sources such as DVD, VCR, STB, and TV(Antenna or Cable).
1 2
Press the SOURCE button on the remote control.
Press the the SEL (
or button to select signal source, then press ) button.
Source
TV Video S-Video Component1 Component2 RGB DVI Move TV Connected Not Connected Connected Connected Not Connected Not Connected Exit
Select
29
Picture
Changing the Picture standard
1 2 3
Press the MENU button.
Press the or button to select the PICTURE ( then press the SEL ( ) or button.
) icon;
or button to select Standard, Dynamic, Mild, Press the or Custom picture setting.
NOTE : You can select a mode from among Middle, High, Low, or Custom modes in RGB/DVI input Sources.
Quick Way
Press the PICTURE button on the remote control. While pressing the button continuously, you can select the picture mode in the following sequence: Standard Dynamic Mild Custom In RGB/DVI mode, you can select : Middle High Low Custom
Customizing the Picture
4
or button to With Picture menu selected, press the select an option (Contrast, Brightness, Sharpness, Color, or Tint-NTSC only) that you wish to change : then press the button. SEL ( ) or If you adjust the Contrast, Brightness, Sharpness, Color, or Tint (NTSC only) settings on the Picture menu, the picture standard is automatically switched to custom.
5
Press the
or
button to change the value of the item.
NOTE : In the PC/DVI mode, the Sharpness, Color, or Tint feature does not work.
After adjustment: Press the MENU button to exit.
30
Picture
Changing the Sound Standard
1 2 3
Press the MENU button.
Press the or button to select the SOUND ( then press the SEL ( ) or button.
) icon;
or button to select Drama, Movie, Music, Press the News, or Custom sound setting.
Quick Way
Press the SOUND button on the remote control. While pressing the button continuously, you can select the sound mode in the following sequence: Drama Movie Music News Custom In RGB/DVI mode, you can select : Middle High Low Custom
Customizing the Sound
4 5 6
or button to select With Sound menu selected, press the an Equalizer; then press the SEL ( ) or button. button to reach the required setting; button.
Sound Mode Equalizer Balance BBE Mode Surround Sound Mode AVL
Move Adjust
Custom Pro.
50 L
Low On Mono Off
Exit
R 50
Sound
Select a frequency(100Hz, 300Hz, 1KHz, 3KHz, or 10KHz) to be adjusted by pressing or button. [. . . ] It will provide you an additional convenience when you use the LCD TV connected with a PC. Separately sold RS-232C cable is required. ) First, connect the RS-232C cable between the PC and the LCD TV RS-232C input port. Refer to the following method for using this function.
Installing Hyper terminal
From the Windows original disks. On most Windows 95/98/2000 machines, Hyperterminal should be installed without explicitly requesting it. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HUMAX L3040
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HUMAX L3040 will begin.