User manual HUMAX LDE-HD32S

[. . . ] Indicates a hazardous situation which, if not avoided, could result in serious injury. This symbol indicates important instructions accompanying the TV. Instruction about the `WEEE' Symbol This product should not be disposed with other household wastes at the end of its working life. Please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. This will prevent possible harm to the environment or human health from uncontrolled waste disposal. Domestic users: Please contact either the retailer where you of where and how they can take this item for environmentally safe recycling. [. . . ] Note: If you connect an active antenna to the TV, you have to set the Antenna Power to On to supply the 5V power into antenna. Active antenna is a portable or indoor antenna which needs power supply from the product because it does not have power cord for itself. English-34 Chapter 5 >> Setting Analog Channels Scanning Analog Channels Manually > Channel Countr y Antenna Power Auto Search Manual Search Edit Channels UK O ff You can save each channel as you identify. Analog channels can be scanned only in sure the main Input is set to using input mode. 2 Select Channel OK OK Move Enter 3 Select Manual Search Colour System is highlighted. Auto BG VHF/UHF 12 99 C14 0 >> Manual Search Colour System Audio System Band Channel Programme No Name Search Fine Tune Save Move Select 4 Select the required broadcasting standard (Auto, PAL, or SECAM) using the 5 Select Audio System 6 Select the required audio system (BG, I, DK or L 7 Select Band 8 Select the required signal source (VHF/UHF or Cable button. 9 Select Channel NUMBER(0~9) button. 10 Select Programme No NUMBER(0~9) button. To change channel names, select Name 11 button. OK 12 Select Search searching channels. 13 Select Fine Tune a good quality of the picture and sound until you reach the optimal setting. 14 Select Save and press the OK button to save. C (Air channel mode): You can select channels by entering the assigned number for broadcasting stations on air in this mode. S (Cable channel mode): You can select a channel by entering the assigned number for cable channels in this mode. English-35 Chapter 5 >> Setting Analog Channels Editing Analog Channels After channel scanning completes, you can delete, skip, move or add into favorite channel group the saved analog channels. > Channel Countr y Antenna Power Auto Search Manual Search Edit Channels UK O ff Analog channels are editable only in the main Input is set to using input mode. 2 Select Channel 3 Select Edit Channels The Edit Channels menu will appear. OK OK Move Enter >> Edit Channels P P P P P P P P P Delete Deleting Channels You can delete channels from the list. 95 96 97 98 99 01 02 03 04 ------------------------------------Skip Fav Move 1 RED button. The selected channel is deleted. Skipping Channels Once channels are selected to skip, you can select the skipped channels using number buttons only. The P+/- buttons will not function for the skipped channels. 1 GREEN button. To clear the skipped channels, select the channel you don't want to skip and press the GREEN button. Adding Favourite Channels You can add favourite channels into the favourite channel group. 1 button and press the YELLOW button. 2 Select Sound 3 Select AVL(Auto Volume Level) 4 Select On/Off 5 Press the EXIT button to return to Live TV or press the BACK button to return to the previous menu. OK Move Select Setting the TruSurround XT TruSurround XT is a patented SRS technology that solves the problem of playing 5. 1multi-channel content over two speakers. TruSurround delivers a compelling, virtual surround sound effect through two-speaker playback system, including built-in television speakers. It is fully compatible with all multi-channel audio formats. > Sound Effec t Balance AVL SRS TruSurround XT Flat 0 O ff O ff 1 Press the MENU button. 2 Select Sound 3 Select SRS TruSurround XT 4 Select On/Off 5 Press the EXIT button to return to Live TV or press the BACK button to return to the previous menu. TruSurround XT technology is incorporated under license from SRS Labs, Inc. English-41 Chapter 8 >> Setting the System Setting the Time Information > System Language Time Setting PIP PC OSD Transparenc y Blue Back Panel O ff Default Setting English You can set the current time. If you want to set time for automatically turning Disable O ff Disable Setting the Current Time 1 Press the MENU button. 2 Select System OK OK Move Enter 3 Select Time Setting >> Time Setting Date Local Time Snooze Power On Time Power O ff Time Auto Power O ff 19. 03. 2007 10 : 00 O ff O ff -- : -TV O ff -- : -O ff 4 Select Date NUMBER(0~9) buttons. 5 Select Local Time NUMBER(0~9) buttons. Move Select Using the TV Timer Function You can schedule time for automatically turning on/off the power so that your TV >> Time Setting Date Local Time Snooze Power On Time Power O ff Time Auto Power O ff 19. 03. 2007 10 : 00 O ff O ff -- : -TV O ff -- : -O ff 6 To set time for turning on the power, select Power On Time On. 7 Power On Time is enabled, enter hour/minute using the NUMBER(0~9) buttons. And select your desired service between TV or Radio using the display the preset service. Move Select 8 To switch into the standby mode momentarily when the TV is turned on automatically at the preset time, select Snooze On. Then, within 10 minutes hour after the TV is turned on automatically at the preset time, if you press the STANDBY button, the TV is switched to the standby mode and will be worked again after 5 minutes. 9 To set time for turning off the power, select Power Off Time On. 10 Power Off Time is enabled, enter hour/minute using the NUMBER(0~9) buttons. >> Time Setting Date Local Time Snooze Power On Time Power O ff Time Auto Power O ff 19. 03. 2007 10 : 00 O ff O ff -- : -TV O ff -- : -O ff Setting the Auto Power Off In case there is no signal, it is possible have your TV automatically turned off to reduce power consumption. 11 Select Auto Power Off select On. The TV will automatically be turned off if there is no signal. Move Select English-42 Chapter 8 >> Setting the System Picture-in-Picture (PIP) Settings (32 inch only) The PIP function allows you to watch two pictures with main and sub screens at the same time using your TV or other external devices. [. . . ] Contact the broadcaster to ensure that the channel is running. - (3) Poor picture/sound quality - Install the antenna in an obstacle-free place. - Keep the power and the antenna cable for the satellite apart from each other. - Set the antenna power in menu to On, if you use the active antenna to improve the reception. - Check the signal levels and adjust your antenna if the level is too low. [. . . ]