Detailed instructions for use are in the User's Guide.
[. . . ] LGB-26TPVR
LCD Digital and Analogue TV Digital 2 Tuner PVR Built-in
GB
LCD Digital and Analogue TV
Caution
To reduce the risk of electric shock, do not remove cover(or back). Indicates a situation which, if not avoided, could damage the equipment or other apparatus. This symbol indicates dangerous voltage inside the LCD-TV that presents a risk of electric shock or personal injury. Indicates a hazardous situation which, if not avoided, could result in serious injury. [. . . ] On watching TV, press the TSR on the remote control until when Time Shift On message appears, and the time shifted recording will be started. _ If you press the TSR button on watching TV, the current state of time shifted recording will be displayed with a message (Time Shift On or Time Shift Off). If you press it once again, the message will be changed to the other state. _ On the channel during time shifted recording, if you press the OK button, TSR On message is shown. Note : If you press the PLAY/PAUSE ( ) button on the Time Shift Off state, it will be switched to the Time Shift On automatically and start the time shifted recording. During time shifted recording, you can press the various playback buttons such as PLAY/PAUSE ( ), FORWARD ( ), REWIND ( ) or INSTANT REPLAY ( ) to playback the recording data saved temporarily in TSR buffer of the programme you are watching. Note : _ You cannot perform Repeat A-B ( ) or Bookmark ( , ) function during time shifted recording. _ If you want to playback the programme which is viewing-restricted or locked, will need the password. If you press a playback button, the TSR time bar will be displayed as following and the data will be played according to each playback function. For more information of the playback buttons, refer to Playback Control.
TSR Time Bar
TSR time bar displays the current operation status for playback of TSR data.
1 2 3 4 5 6
7
8
Start time of TSR time bar Watching point Live or broadcasting point Total amount of programme saved to TSR buffer (max 30 minutes) End time of TSR time bar Play status (The speed is shown in playing of fast-forward, fast-rewind, slow-forward, slow-rewind. ) 7. Current time (The time of live or broadcasting point) When the play status is PLAY or LIVE on TSR time bar, if you take no action for about 3 seconds, TSR time bar will be minimized and displayed on the lower right-hand side of the screen. If you press the STOP ( ) button, the TSR time bar will disappear and the playback will be stopped. To stop the time shifted recording, press the TSR button until when Time Shift Off message appears.
Note : _ It is possible that you may not record the scrambled programme or data programme normally. _ During the TSR playback or Programme Playback, the TruSurround XT and Auto Volume Level menus are disabled.
36
. Recording
Playback
Programme Playback
You can watch the recorded programme by selecting a desired programme in the Menu - Recording - Recorded Programmes and pressing the OK or PLAY/PAUSE ( ) button.
1. Select Recording using the / button, and press the OK or / button.
3. Select Recorded Programmes using the OK or
button, and press the
button to display the recorded programme list. Select a desired programme to playback using the press the OK or PLAY/PAUSE (
) button to playback the programme.
5. Time bar appears as following and starts playback of the selected programme instantly.
Time Bar
Time bar displays the current operation status.
1 2 3 4 5 6
7
8
9
1. Play status (The speed is shown in playing of fast-forward, fast-rewind, slow-forward, slow-rewind. ) 7. Input source mode of the recorded programme (Digital, Analog, AV1/2/3/4, S-Video) 8. Programme name When the play status is PLAY on Time bar, if you take no action for about 3 seconds, Time bar will be minimized and displayed on the lower right-hand side of the screen. [. . . ] Menu Map
Troubleshooting
Troubleshooting
Before contacting your local service dealer, please make sure you refer to the following guide. If the LCD-TV does not work normally after completing the following trouble shooting, please contact your local LCD-TV distributor or service centre.
1. No message is displayed on the front panel or the LCD-TV has no power + Check the main power cable and check that it is plugged into a suitable power outlet. + Make sure that the AV Cable(SCART, SVHS, etc) is firmly connected to the LCD-TV. [. . . ]