User manual HUSQVARNA 225 RJ
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HUSQVARNA 225 RJ. We hope that this HUSQVARNA 225 RJ user guide will be useful to you.
Manual abstract: user guide HUSQVARNA 225 RJ
Detailed instructions for use are in the User's Guide.
[. . . ] 225R/RD/RJ 232R/RD 235R
Operator's Manual (CARB, EPA)
101 89 27-95
Read through the Operator's Manual carefully and understand the content before using the machine.
SYMBOL EXPLANATION
Symbols
WARNING!Careless or incorrect use can result in serious or fatal injury to the operator or others. Read through the Operator‘s Manual carefully and understand the content before using the machine. • Only use non-metallic, flexible cutting elements, that is trimmer head with trimmer cord. [. . . ] Children, animals, onlookers and helpers should be kept outside the safety zone of 15 m (50 feet). Stop the machine immediately if anyone approaches.
14 – English
WHAT IS WHAT?
27
28
30
What is what on the brush cutter?
1. Spray guard
English –
15
ASSEMBLY
Assembling the handlebars (225R/RD/ 232R/RD)
• Remove the screw at the rear of the throttle handle. • Slide on the throttle handle on the right-hand side of the handlebars, (see the diagram). • Align the hole in the throttle handle for the fixing screw with the hole on the handlebars. • Fit the screw through the throttle handle and the handlebars and tighten. • Put on the harness and hang the machine in the suspension hook. Now finely adjust so that the machine gives a comfortable working position when it‘s attached to the harness. Tighten the handle.
Assembling the handlebars (235R)
• Remove the screw at the rear of the throttle handle. • Slide on the throttle handle on the right-hand side of the handlebars, (see the diagram). • Align the hole in the throttle handle for the fixing screw with the hole on the handlebars. • Fit the screw through the throttle handle and the handlebars and tighten. • Put on the harness and hang the machine in the suspension hook. Now finely adjust so that the machine gives a comfortable working position when it‘s attached to the harness. Tighten the handle.
16 – English
ASSEMBLY
Assembling the J-handlebars (225RJ)
!
WARNING!When fitting the J-handle only grass blade or trimmer head may be used. Sawblades must not be used.
• Unscrew the handle and plastic cover from the handlebar bracket. • Place the handlebars with the handlebar holder on the handlebar bracket. Fit the handle and plastic cover on the handlebar bracket by inserting the handle in the hole. • Put on the harness and hang the machine in the suspension hook. Now finely adjust so that the Jhandlebars give a comfortable working position when attached to the harness. Tighten the handle.
Transport position, handlebars and J-handlebars
• The handlebars can easily be turned to fit along the shaft for easy transportation and storage. [. . . ] The table indicates the highest and lowest values.
28 – English
TECHNICAL DATA
Approved accessories 225R/RD/RJ Centre hole in blades Ø 20 mm Threaded blade axle M10 Grass blade Type Cutting attachment guard Art No. 503 74 40-01 503 74 40-01 503 74 40-01 503 77 39-01 503 74 50-01 503 74 50-01 503 74 50-01 503 74 50-01 503 74 50-01 -
Saw blade (Not 225RJ) Plastic knifes Trimmer head
Edger (RD) Support cup
Grass 255-4 (∅ 255 4-teeth) Grass 255-8 (∅ 255 8-teeth) Multi 255-3 (∅ 255 3-teeth) Maxi X 200-26 (∅ 200 26-teeth) Tricut ∅ 300 Trimmy H II Trimmy Hit Pro Trimmy Fix Superauto II Edger attachment ∅ 200 Fixed
Approved accessories 232R/RD Centre hole in blades Ø 20 mm Threaded blade axle M10 Grass blade
Type Grass 255-4 ( ∅ 255 4-teeth) Grass 255-8 ( ∅ 255 8-teeth) Multi 255-3 ( ∅ 255 3-teeth) Multi 275-4 ( ∅ 275 4-teeth) Maxi X 200-26 (∅ 200 26-teeth) Tricut ∅ 300 Trimmy H II Trimmy Hit Pro Trimmy Fix Superauto II Edger attachment ∅ 200 Fixed
Cutting attachment guard Ref No. 503 74 40-01 503 74 40-01 503 74 40-01 503 74 40-01 503 77 39-01 503 74 40-01 503 74 50-01 503 74 50-01 503 74 50-01 503 74 50-01 -
Saw blade Plastic knives Trimmer head
Edger (RD) Support cup
Approved accessories 235R Centre hole in blades Ø 20 mm Threaded blade axle M12 Grass blade
Type
Cutting attachment guard Ref No. 502 26 34-01 502 26 34-01 502 26 34-01 502 27 22-01 502 26 34-01, 503 91 60-01 503 91 60-01 503 91 60-01 -
Saw blade Plastic knives Trimmer head Support cup
Multi 255-3 (∅ 255 3-teeth) Multi 275-4 (∅ 275 4-teeth) Multi 300 (∅ 300 3-teeth) Maxi X 200-26 (∅ 200 26-teeth) Tricut ∅ 300 Trimmy SII Trimmy S Fixed With bearing
English –
29
FEDERAL AND CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS
The EPA (U. S. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSQVARNA 225 RJ
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSQVARNA 225 RJ will begin.