User manual HUSQVARNA HAU18H48F
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HUSQVARNA HAU18H48F. We hope that this HUSQVARNA HAU18H48F user guide will be useful to you.
Manual abstract: user guide HUSQVARNA HAU18H48F
Detailed instructions for use are in the User's Guide.
[. . . ] 01960_husqvarna
02478
YTH1848XP
Owner's Manual
SAFETY RULES
SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS
IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
I. GENERAL OPERATION
⢠⢠⢠⢠⢠⢠⢠⢠⢠⢠⢠⢠⢠⢠⢠⢠Read, understand, and follow all instructions in the manual and on the machine before starting. Only allow responsible adults, who are familiar with the instructions, to operate the machine. [. . . ] 13)
⢠Raise mower to highest position to allow access to blades. NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth. ⢠Install new or resharpened blade with stamped "THIS SIDE UP" facing deck and mandrel assembly.
IMPORTANT: TO ENSURE PROPER ASSEMBLY, CENTER HOLE IN BLADE MUST ALIGN WITH STAR ON MANDREL ASSEMBLY.
â¢
Install and tighten blade bolt securely (45-55 Ft. torque).
IMPORTANT: SPECIAL BLADE BOLT HEAT TREATED.
17
MAINTENANCE
⢠⢠⢠⢠Rinse the battery with plain water and dry. Reinstall battery (See âREPLACING BATTERY" in the SERVICE AND ADJUSTMENTS section of this manual). ⢠Remove yellow cap from bottom ï¬tting of drain valve and install the drain tube onto the ï¬tting.
OIL DRAIN VALVE CLOSED AND LOCKED POSITION
V-BELTS
Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. Replace belts if they begin to slip from wear.
TRANSAXLE COOLING
The transmission fan and cooling ï¬ns should be kept clean to assure proper cooling. Do not attempt to clean fan or transmission while engine is running or while the transmission is hot. To prevent possible damage to seals, do not use high pressure water or steam to clean transaxle. ⢠Inspect cooling fan to be sure fan blades are intact and clean. ⢠Inspect cooling ï¬ns for dirt, grass clippings and other materials. To prevent damage to seals, do not use compressed air or high pressure sprayer to clean cooling ï¬ns.
YELLOW CAP
DRAIN TUBE
02463
TRANSAXLE PUMP FLUID
The transaxle was sealed at the factory and ï¬uid maintenance is not required for the life of the transaxle. Should the transaxle ever leak or require servicing, contact your nearest authorized ser vice center/department.
FIG. 16 ⢠⢠⢠⢠⢠Unlock drain valve by pushing inward and turning counterclockwise. After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown. Remove the drain tube and replace the cap onto to the bottom ï¬tting of the drain valve. Reï¬ll engine with oil through oil ï¬ll dipstick tube. For approximate capacity see âPRODUCT SPECIFICATIONSâ section of this manual. Insert dipstick into the tube and rest the oil ï¬ll cap on the tube. Tighten cap onto the tube securely when ï¬nished.
ENGINE
See Engine Manual.
LUBRICATION
Only use high quality detergent oil rated with API service classiï¬cation SF-SJ. Select the oilâs SAE viscosity grade according to your expected operating temperature.
SAE VISCOSITY GRADES SAE 30 5W-30
F C -30 -20 -20 0 -10 30 32 0 40 10 60 20 80 30 100 40
â¢
CLEAN AIR SCREEN
Air screen must be kept free of dirt and chaff to prevent engine damage from overheating. Clean with a wire brush or compressed air to remove dirt and stubborn dried gum ï¬bers. [. . . ] HUSQVARNA RESERVES THE RIGHT TO CHANGE OR IMPROVE THE DESIGN OF THE PRODUCT WITHOUT NOTICE, AND DOES NOT ASSUME OBLIGATION TO UPDATE PREVIOUSLY MANUFACTURED PRODUCTS. Some states do not allow the exclusion of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you speciï¬c legal rights, and you may also have other rights which vary from state to state.
SECTION 1: LIMITED WARRANTY
Husqvarna Forest & Garden Company (âHusqvarnaâ) warrants Husqvarna product to the original purchaser to be free from defects in material and workmanship from the date of purchase for the âWarranty Periodâ of the product as set forth below: Lifetime Warranty: All tiller tines against breakage, trimmer shafts, ignition coils and modules on hand held product. 3 Year Warranty: Spindles (on Zero Turn Riders and Commercial Walk-Behinds) 2 Year COMMERCIAL-Warranty: Husqvarna Commercial Turf Equipmentâzero turn riders, wide area walks, and ground engaging commercial equipment. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HUSQVARNA HAU18H48F
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HUSQVARNA HAU18H48F will begin.