Detailed instructions for use are in the User's Guide.
[. . . ] Title: C79EGMST CreationDate: 02/10/98 09:24:42
IBM ThinkPad 600 User's Reference
Title: C79EGMST CreationDate: 02/10/98 09:24:42
Title: C79EGMST CreationDate: 02/10/98 09:24:42
IBM ThinkPad 600 User's Reference
IBM
Title: C79EGMST CreationDate: 02/10/98 09:24:42
Note Before using this information and the product it supports, be sure to read the general information under "Safety Information" on page xiii, "Ergonomics Information" on page 40, and "Notices" on page 173.
First Edition (January 1998)
The following paragraph does not apply to the United Kingdom or any country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT ANY WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE LIMITED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimers or express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. [. . . ] Make a DOS system diskette that has the DOS FDISK. COM and FORMAT. COM utilities and the CD-ROM device driver for DOS. How do I use the Recovery CD to reload my factory-installed ThinkPad operating system and applications?See "Using the Recovery CD" on page 150.
110
IBM ThinkPad 600 User's Reference
Title: C79EGMST CreationDate: 02/10/98 09:24:42
Hints, Tips, and Limitations
Hints, Tips, and Limitations
This section provides hints, tips, and limitations. For Windows 95: If you are using the Intel USB camera and the system resumes from suspend mode, the USB camera is disabled. Your computer might not enter suspend mode or hibernation mode after the end of a timeout period that was specified in the ThinkPad Configuration program because of the CD-ROM drive property settings. If you want to use suspend mode and hibernation mode, change the properties of the CD-ROM drive as follows:
1. Click on the CD-ROM drive name under the CD-ROM; then click on the Properties button. Click on the Settings tab and remove the check mark from the Auto insert notification check box in Option by clicking on it. Solving Computer Problems
111
Title: C79EGMST CreationDate: 02/10/98 09:24:42
Hints, Tips, and Limitations
For OS/2 Warp: If you have formatted your drive using high-performance file system (HPFS) and your system has more than 64 MB memory installed, hibernation is not supported. If the COM port does not work even if you have set it up correctly with the ThinkPad Configuration program, do as follows:
1. If you receive incoming faxes or mail under OS/2, you must set the modem settings in the fax application to one of the following: Hardware FIFO enabled Hardware Flow Control on UART 16550A modem In OS/2 FaxWorks for example, select Utilities, Settings, Modem Type, and Use HW FIFO (16550A). If you do not set your modem to one of these settings, you will not be able to receive an incoming fax or an incoming call in suspend mode.
For Windows NT: For Windows NT 4. 0, hibernation is not supported if the drive is formatted by NTFS. For more information, refer to the following Web site: http://www. pc. ibm. com/thinkpad
112
IBM ThinkPad 600 User's Reference
Title: C79EGMST CreationDate: 02/10/98 09:24:42
Hints, Tips, and Limitations
Using the Power Management Modes
You can select either the Resume on incoming call option or the Hibernate X minutes after suspend option but not both. If you select one option, the other option becomes gray and cannot be selected. Click on Resume on incoming call.
To enable Hibernate X minutes after suspend, do as follows:
1. Click on Hibernate X minutes after suspend.
Using a PC Card with the Docking Station
In the Windows 95, Windows NT, Windows 3. 1, or DOS environment, you need to install the PC Card support software after docking your computer to the docking station. If you have already installed the PC Card support software, uninstall it and then reinstall it after you dock your computer to the docking station.
USB Connector Considerations
For PCI Cards in the SelectaDock III Docking Station
When the setting of the USB connector on your computer is enabled (the default setting), do not use a PCI Video Card and a PCI Network Card at the same time in the SelectaDock III docking station. Your system cannot start if both cards are inserted.
For the USB Connector Setting on the SelectaDock III Docking Station
Do not disable the USB connector on the SelectaDock III. If you disable it, the system might hang during a hot- or warm-dock or undock operation. Solving Computer Problems
113
Title: C79EGMST CreationDate: 02/10/98 09:24:42
Hints, Tips, and Limitations
If a USB Device is Disabled
If your computer tries to enter suspend mode and the request is rejected, the device in the USB connector might be disabled. If this occurs, do a hot-unplug and -plug operation for the USB device.
Using a Second CardBus Card
If a CardBus Card is already configured in your computer or in the docking station (SelectaDock III or PC Card Enabler), you must configure the second CardBus manually by using the Device Manager. To get to the Device Manager, click on the System icon in the Control Panel.
Using an External Condenser Microphone
If you are using a microphone with your computer, use the ThinkPad-option headset. [. . . ] Often referred to as random-access memory (RAM), measured in kilobytes (KB) or megabytes (MB) of information. One or more microinstructions used in a product as an
alternative to hard-wired circuitry to implement functions of a processor or other system component. A device that connects your computer to a telephone line, allowing it to communicate with another computer at another location. A port used to attach such devices as dot-matrix printers and input/output units; it transmits data 1 byte at a time. [. . . ]