User manual JENSEN JSR-1000

[. . . ] If you take a few minutes to look through it, you'll learn how to use all of the features of your new JENSEN marine stereo for maximum enjoyment. Function LF+ Speaker LF­ Speaker LR+ Speaker LR­ Speaker RF+ Speaker RF­ Speaker RR+ Speaker RR­ Speaker Power Antenna Ground Ignition Battery Color white white/black green green/black gray gray/black violet violet/black dark blue black red yellow CD Changer Connector Conector para del cambiadiscos de CD Connecteur du changeur de CD Auxiliary Input Cables Connect a pre-amp level external audio source (MP3, tape player, etc. Memory/Battery Connect to battery or 12 volt power source that is always alive. [. . . ] Memory/Battery Connect to battery or 12 volt power source that is always alive. Fuses When replacing a fuse, make sure new fuse is correct type and amperage. Does not operate (display does not light) No power to yellow wire No power to red wire Make sure wire is not pinched. Inline fuse blown No power to unit No speakers operate (display lights normally) Not all speakers operate Inline fuse blown Speaker harness not connected Incorrect splices or connections Speaker wires shorting to chassis ground or to each other Blows fuses Power wire shorting to ground Speaker wires shorting to ground Incorrect fuse/ fuse too small CD skips too much Receiver mount is not solid or backstrap is not secure Check disc - may be upside down or dirty If not press RESET button. CDC ONLY ERR2 appears on display TOC reading error Check disc - may be upside down or dirty If not press RESET button. DIM/Loudness Pressing LOUD for more than 3 seconds will dim the display. Press and hold DISP button for three seconds until clock display flashes, then release. Press MEM for more than 3 seconds while in programmed play to clear programming. Direct Track Access Select track number by pressing numbered keys (1 ­ 0). Direct Disc Access Press SHIFT button then select disc number using number keys. Note: Depending on CD changer, if selected disc tray is empty, CD changer may either advance to next disc or revert to previous disc. The compact disc changer plays all songs on a disc then advances to the next disc in order. Skip Tracks, Direct Track Access, Fast Forward and Fast Reverse, Pause, Repeat, Random and Intro Scan functions can be performed on CDs played through the CD Changer. Select additional tracks from current disk using << or >>, select tracks from another disk using SHIFT and << or>>. [. . . ] Skip Tracks, Direct Track Access, Fast Forward and Fast Reverse, Pause, Repeat, Random and Intro Scan functions can be performed on CDs played through the CD Changer. Select additional tracks from current disk using << or >>, select tracks from another disk using SHIFT and << or>>. Press MEM for more than 3 seconds while in programmed play to clear programming. [. . . ]