User manual JENSEN JTA-450

[. . . ] JTA-450 3-SPEED STEREO TURNTABLE WITH MP3 ENCODING AND AM/FM STEREO RADIO INSTRUCTION MANUAL PLEASE READ THIS OPERATING MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN IT FOR FUTURE REFERENCE. IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO NOT OPEN THE CABINET REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE MARKED ON THE UNIT, KEEP THESE INSTRUCTIONS. This set has been designed and manufactured to assure personal safety. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. [. . . ] BASS BOOST OPERATION To enhance the low frequency sound, press the BASS BOOST BUTTON (13) once (button in) to activate. Press the BASS BOOST Button (13) again (button out) to turn the Bass Boost off. Note : Please refer to the ON/OFF graphic on the Front Panel for correct operation of the Bass Boost function. Set the Speed Selector Switch to 33, 45 or 78 rpm according to the record you are playing. Place the included 45 RPM adaptor (2) over the center spindle when playing 45 rpm records. Move the Tone Arm to the beginning of the record or to the beginning of a particular track. To stop the record before it ends, lift the Tone Arm (4) using the Cue-lever (3) and return it carefully onto the Tone Arm Clamp (6). Moving or jarring the turntable without securing the Tone arm clamp could result in damage to the Tone arm. AUTO-STOP SWITCH OPERATION The Auto-Stop area on some records may extend beyond the preset setting. As a result the turntable could possibly stop before the last track finishes. If you experience this during playback, set the AUTO-STOP Switch (27) located on the back of the unit to the "OFF" position. The turntable will now run to the end of the record, but will no longer stop automatically. To stop the turntable you will need to either set the Function Selector (12) to the OFF position or return the AUTO-STOP Switch (27) to the "ON" position. After the record stops, lift and return the Tone Arm (4) carefully back onto the Tone Arm Clamp (6). 7 IMPORTANT: Moving or jarring the Turntable without securing the Tone Arm Clamp (6) could result in damage to the Tone Arm (3). ENCODING RECORDS TO MP3 You can convert you favorite records into MP3 files and store then on a USB Flash Drive or SD/MMC Memory Card via the USB port (22) or SD/MMC slot (20) located on the front panel. Insert a USB flash drive into the USB PORT (22) or an SD/MMC Memory Card into the SD/MMC Slot (20) located on the front panel. Press the RECORD Button (17), "REC" and "USB" will begin to flash in the display, If a USB Flash Drive is inserted. If an SD/MMC Card is inserted then "REC" and "CARD" will flash in the display. If both USB and SD/MMC card are inserted, then Icon "SEL" will also appear and flash in the Display. You can use the SKIP + Button (18) or the SKIP - Button (19) to select what media you want to record to. The selected track will start playback automatically. FOLDER SKIP To select a particular folder, in Stop mode or during playback, press the FOLDER UP /DOWN Button (9, 10), until the track number (first track number) of the Album appears in the Display. Playback of the first track of the selected folder will start automatically. REPEAT 1/FOLDER/ ALL PLAYBACK 1. During playback, if you want to repeat the same track, simply press the MODE ` appears in the Display. 3. The track will be repeated and stop until the STOP Button (3) is pressed. [. . . ] Connect the "L" & "R" LINE OUT Jacks and the AUX IN of your Audio Amplifier. Select the music source by setting the Function Selector (12) to "PHONO", "USB/SD" or "TUNER" as desired. 7. Sound will then come out from the system's built-in speakers and the external Amplifier's speakers simultaneously. Set the VOLUME CONTROL (23) to "MIN" and adjust the sound level using the VOLUME CONTROL on the external Amplifier as desired. [. . . ]