User manual JENSEN MR-720

[. . . ] Please make sure to use an AC adapter with a rating of 6V DC, 200 mA with the following center positive (+) polarity. 2. The CHARGING Indicator (#3) will light. If you are using a universal adapter with an output polarity switch or polarized plugs, be sure to set the center plug polarity to "+". Note: The CHARGE Indicator will light once the AC Adaptor is plugged into the AC outlet regardless of the setting of the POWER SOURCE SWITCH (#7). [. . . ] DISPOSAL OF LITHIUM ION BATTERY Bring the Lithium Ion batteries to an RBRC participating retailer. To find a retailer near you visit: www. rbrc. org or call: 1-800-8-battery Lithium Ion batteries can also be discarded with household trash. Press and hold the TIME SET Button (#18), press HOUR (#15) to set hour and MINUTE (#16) to set minute. NOTE: When setting the time, make sure to correctly set for AM or PM in order for the Alarm to function properly. LISTENING TO AM, FM, OR WEATHER BAND 1. Set the POWER SOURCE Switch (#7) to (Rechargeable Battery) or (Dry Cell Battery) position depending on the power source you choose to use. During AM or FM reception, to view the time simply press the RADIO/CLOCK (# 20) Button once. 4 5 5. Select your local NOAA channel with the 7 position PRESET WEATHER CHANNEL Switch (#21) located on the back of the unit. To receive emergency weather alert warnings, turn the unit on, tune to the strongest local NOAA channel, adjust the volume control to a level that you will hear when an alert is received. NOTE: The NOAA Weather Service broadcasts a test alert every Wednesday between 11 am and Noon. To receive the broadcasts, the radio must be within the range of the local broadcast site, 10 - 40 miles, depending on terrain and obstructions. To insure maximum FM or WEATHER band reception, the Telescopic Antenna (#1) should be fully extended to obtain the best possible signal. When tuning in AM stations, be sure to place the unit in a vertical position. To insure best AM reception, try repositioning the unit until the best signal reception is obtained. To learn more: Click on http://www. nws. noaa. gov/nwr/ for NOAA (National Oceanic & Atmospheric Administration) and http://www. ec. gc. ca/ for Environment Canada. The Alarm Icon will appear in the right top corner of the LCD Display indicating that the alarm function is enabled. To wake to Alarm turn the VOLUME Knob (#10) counter-clockwise until a click is heard. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ]