User manual JENSEN VOYAGER K-9 INSTALLATION

[. . . ] ASA Electronics TV/VCP Floor Console Model K-9 With out Harness and Antenna 12 Volt DC powered remote controlled 9" television AVT-975 12 Volt DC powered remote controlled VHS Video Cassette Player AVP-7000 Installation Instructions Audiovox Specialized Applications, LLC 23319 Cooper Drive Elkhart IN 46514 1 (219) 264-3135 www. audiovox. com Page 1 of 10 P/N 8007132 REV. [. . . ] B Step #3 INSTALL CONSOLE TO FLOOR OF VEHICLE BEFORE DRILLING ANY HOLES VERIFY THAT DRILL BIT WILL NOT ENTER INTO FRAME RAIL(S) OF VEHICLE, ELECTRICAL WIRES, FUEL LINES, BRAKE LINES, HOSES, EXHAUST SYSTEMS OR ANY OTHER ITEMS THAT WILL IMPAIR OPERATION OF VEHICLE. CLIMB UNDER VEHICLE AND LOOK TO VERIFY THAT HOLES WILL BE IN PROPER LOCATIONS. Set console on floor of vehicle and mark where holes are to be drilled. Drill small 1/8" pilot holes to verify that drill holes are in proper locations. After verifying that 1/8" pilot holes are in proper locations, use ¼ drill bit to " enlarge 1/8" pilot holes. Place bolts through feet of console and into holes previously drilled. Have second person inside vehicle hold bolts securely with box-end wrench while person underneath vehicle tightens down nuts. P/N 8007132 Page 7 of 10 Rev. Connect white RCA connector (customer supplied) from console wiring harness to white audio output jack of VCP. [. . . ] Install four Phillips screws that hold the face to the body. P/N 8007132 Page 10 of 10 Rev. [. . . ]