User manual JVC KD-G502B
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual JVC KD-G502B. We hope that this JVC KD-G502B user guide will be useful to you.
Manual abstract: user guide JVC KD-G502B
Detailed instructions for use are in the User's Guide.
[. . . ] CD RECEIVER
KD-G502
This unit is equipped with the display demonstration. To cancel it, see page 6.
INSTRUCTIONS
GET0193-011A
[B]
IMPORTANT FOR LASER PRODUCTS
1. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. [. . . ] Each time you press the button, the repeat play mode changes as follows:
1 Press MODE to enter the
functions mode while playing an MP3 disc.
TRK RPT
2 Press RND (random), while
"MODE" is still flashing on the display, so that "FLDR RND" or "DISC RND" appears on the display. Each time you press the button, the random play mode changes as follows:
FLDR RPT
Canceled
RPT indicator Ex. : When you select "TRK RPT" Active indicator
FLDR RND
DISC RND
Canceled
Mode TRK RPT FLDR RPT
Plays repeatedly
RPT indicator The current (or lights up. All files of the current (or specified) folder.
RND and
(folder) indicators
Ex. : When you select "FLDR RND"
26
SOUND ADJUSTMENTS
Selecting preset sound modes (C-EQ: custom equalizer)
You can select a preset sound mode (C-EQ: custom equalizer) suitable to the music genre. If the setting is canceled before you finish, start from step 1 again. Ex. : When you select "ROCK" Indication USER ROCK CLASSIC For: (Flat sound) Rock or disco music Classical music Light music Funk or rap music Jazz music Preset values BAS TRE 00 +01 02 +01 00 +03 LOUD OFF ON OFF OFF ON OFF 00 +03 +01 +04 +02 +02 Indication pattern changes for each sound mode except for "USER. "
1
Press MODE to enter the functions mode.
2
POPS
Press EQ (equalizer) while "MODE" is still flashing on the display.
You can confirm the current sound mode.
HIP HOP JAZZ
3
Select the sound mode you want.
Each time you press the button, the sound modes change as follows:
Note: You can adjust each sound mode to your preference. Once you make an adjustment, it is automatically stored for the currently selected sound mode. See "Adjusting the sound" on page 28.
USER JAZZ
ROCK HIP HOP
CLASSIC POPS
USER
ROCK
JAZZ
CLASSIC
HIP HOP
POPS
27
Adjusting the sound
You can adjust the sound characteristics to your preference.
*1 When you adjust the bass, treble, or loudness, the
adjustment you have made is stored for the currently selected sound mode (C-EQ) including "USER. " *2 If you are using a two-speaker system, set the fader level to "00. " *3 Normally the control dial works as the volume control. So you do not have to select "VOL" to adjust the volume level. (See page 32 for details. )
1
Select the item you want to adjust.
Each time you press the button, the adjustable items change as follows:
BAS
(bass)
TRE
(treble)
(fader)
FAD
2
Adjust the setting.
To increase the level or turn on the loudness To decrease the level or turn off the loudness Indication pattern changes as you adjust the bass or treble.
VOL
(volume)
LOUD
(loudness)
BAL
(balance)
Indication BAS*1
To do: Adjust the bass.
Range 06 (min. ) | +06 (max. ) 06 (min. ) | +06 (max. ) R06 (Rear only) | F06 (Front only)
TRE*1
Adjust the treble.
FAD*2
Adjust the front and rear speaker balance.
Ex. 1: When you adjust "TRE" (treble)
BAL
Adjust the left L06 (Left only) and right speaker | balance. R06 (Right only) Boost low and high frequencies LOUD ON to produce a well| balanced sound LOUD OFF at low volume level. 2: When you turn on the loudness
LOUD*1
3
Repeat steps 1 and 2 to adjust the other items.
VOL*3
To reset each sound mode to the factory settings, repeat the same procedure and reassign the preset values listed in the table on page 27.
28
OTHER MAIN FUNCTIONS
Changing the general settings (PSM)
You can change the items listed in the table below and on page 30 by using the PSM (Preferred Setting Mode) control.
3
Adjust the PSM item selected.
Basic Procedure
1
Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See below and page 30. )
4 5
Repeat steps 2 and 3 to adjust the other PSM items if necessary. Finish the setting.
2
Select the PSM item you want to adjust.
Preferred Setting Mode (PSM) items
· For detailed operations of each PSM items, refer to the pages listed in the table. Indications DEMO CLOCK H CLOCK M 24H/12H AUTO ADJ AF-REG Display demonstration Hour adjustment Minute adjustment 24/12-hour time display Automatic clock setting Alternative frequency/ Regionalization reception 12H OFF AF OFF*
1
Selectable values/items DEMO OFF DEMO ON
Factory-preset See settings page DEMO ON 0 (0:00) 7 00 (0:00) 6
0 -- 23 (1 -- 12) 00 -- 59 24H ON AF REG
24H ON AF
7 16 11, 12
*1 Displayed only when the "DAB AF" is set to "OFF. "
CONTINUED ON THE NEXT PAGE
29
Indications PTY STBY PTY standby
Selectable values/items OFF 29 programme types (see page 17)
Factory-preset See settings page OFF 13
TA VOL
Traffic announcement volume Programme search Alternative frequency search DAB volume adjustment Level display Dimmer mode
VOL 00 -- VOL 30 or 50*2 OFF AF OFF ON AF ON
VOL 20 OFF AF ON VOL 00 ON AUTO
16 16 42 42 31 31
P-SEARCH DAB AF*3
DAB VOL*3 LEVEL DIMMER
VOL 12 -- VOL 12 OFF AUTO ON ON OFF
TEL
Telephone muting
OFF
MUTING 1 MUTING 2
OFF
31
SCROLL
Scroll mode
ONCE OFF
AUTO
ONCE CHANGER TAG ON HIGH PWR
31 32 32 32
EXT IN*4 TAG DISP AMP GAIN
External component Tag display Amplifier gain control
CHANGER TAG OFF LOW PWR
LINE IN TAG ON HIGH PWR
*2 Depending on the amplifier gain control setting. (See page 32 for details. ) *3 Displayed only when the DAB tuner is connected. *4 Displayed only when one of the following sources is selected--FM, AM, and CD.
30
To select the level meter--LEVEL
You can activate or deactivate the level meter according to your preference. Cancels the audio level indicator; sound mode indicator is shown.
To select the telephone muting--TEL
This mode is used when a cellular phone system is connected. Depending on the phone system used, select either "MUTING 1" or "MUTING 2" whichever mutes the sounds from this unit. · OFF: Cancels the telephone muting.
To select the dimmer mode--DIMMER
When you turn on the car headlights, the display automatically dims (Auto Dimmer). Always dims the display.
To select the scroll mode--SCROLL
You can select the scroll mode for the disc information (when the entire text cannot be shown at once). When shipped from the factory, scroll mode is set to "ONCE. " · ONCE: · AUTO: · OFF: Scrolls only once. [. . . ] The built-in microcomputer may function incorrectly due to noise, etc.
Press the reset button of the CD changer. Press the reset button on the panel holder after detaching the control panel. (The clock setting and preset stations stored in memory are erased. ) (See page 2. )
About mistracking: Mistracking may result from driving on extremely rough roads. We recommend that you stop disc play while driving on such rough roads.
CD Changer
Connect this unit and the CD changer correctly and press the reset button of the CD changer.
47
MAINTENANCE
Handling discs
This unit has been designed to reproduce CDs, CD-Rs (Recordable), CD-RWs (Rewritable), and CD Texts. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE JVC KD-G502B
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual JVC KD-G502B will begin.