User manual KARCHER HD 6 13 C

[. . . ] Safety valve (only HD 7/18) The safety valve opens when the permissible operating pressure is exceeded; water flows back to the suction side of the pump. The overflow valve, pressure switch and safety valve are set and sealed at the factory. Symbols on the machine High-pressure jets can be dangerous if improperly used. The jet may not be directed at persons, animals, live electrical equipment or at the appliance itself. [. . . ] In case of transport damage inform vendor immediately Check oil level  Read the oil level display when the device is not running. Activate deaeration of oil container  Unscrew the fastening screws of the device hood; remove the device hood. σ Cut off tip of oil container cover  Fasten the device hood. Attaching the Accessories  Mount the nozzle on the spray pipe (markings on the adjustment ring at the top). In devices without hose drum:  Loosen the clamps of the pushing handle. σ Fasten the high pressure hose to the high pressure connection. Select the rotation direction in 20 EN – 3 Water connection Connection to the water supply ṇ Warning Observe regulations of water supplier. According to the applicable regulations, the appliance must never be used on the drinking water supply without a system separator. Caution Always connect the system separator to the water supply, never directly to the appliance!For connection values refer to technical specifications  Connect the supply hose (max length 7. 5 m, minimum diameter 1/2“) to the water connection point of the machine and at the water supply point (for e. Turn off the appliance  Set the appliance switch to "0". σ Press the safety lever of the hand-spray gun to secure the lever of the pistol against being released accidentally. Weekly  Check oil level Please contact Customer Service immediately if the oil is milky (water in oil). maintenance and care ƽ Danger Risk of injury by inadvertent startup of appliance and electrical shock. First pull out the plug from the mains before carrying out any tasks on the machine. Note Please dispose off used oil only in the collection points provided for them. Oil change Note See "Technical Details" for details of oil quantity and type. σ Unscrew the fastening screws of the device hood; remove the device hood. Safety inspection/ maintenance contract You can sign with your dealer a contract for regular safety inspection or even sign a maintenance contract. Before each use  Check connection cable for damages (risk of electrical shock); get the damaged connection cable replaced immediately by an authorised customer service person/ electrician. 3 drops per minute are permitted and can come out from the lower side of the appliance. [. . . ] This declaration shall cease to be valid if the machine is modified without our prior approval. 214-xxx Relevant EU Directives 2006/42/EC (+2009/127/EC) 2004/108/EC 2000/14/EC Applied harmonized standards EN 60335–1 EN 60335–2–79 EN 55014–1: 2006 + A1: 2009 EN 55014–2: 1997 + A2: 2008 EN 61000–3–2: 2006 + A2: 2009 HD 7/10, HD 7/16, HD 7/18 EN 61000–3–3: 2006 HD 5/17, HD 6/12, HD 6/15: EN 61000–3–11: 2000 EN 62233: 2008 Applied conformity evaluation method 2000/14/EC: Appendix V Sound power level dB(A) HD 5/17 Measured: 85 Guaranteed: 86 HD 6/12 Measured: 83 Guaranteed: 85 HD 6/15 Measured: 85 Guaranteed: 86 HD 7/10 Measured: 90 Guaranteed: 91 HD 7/18 Measured: 90 Guaranteed: 91 The undersigned act on behalf and under the power of attorney of the company management. 0, 6 21 26 12 18 043 10 230 1~ 50 2, 8 Main Supply Voltage Current type Connected load Protection (slow, char. Operating over-pressure MPa Nozzle size Flow rate I/min Detergent suck in I/min Max. [. . . ]