User manual KARCHER INNO-FOAM-SET

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KARCHER INNO-FOAM-SET. We hope that this KARCHER INNO-FOAM-SET user guide will be useful to you.


KARCHER INNO-FOAM-SET : Download the complete user guide (2517 Ko)

Manual abstract: user guide KARCHER INNO-FOAM-SET

Detailed instructions for use are in the User's Guide.

[. . . ] Application s The unit with the working equipment must be checked to ensure it is in perfect working order and safe for operation before use. Please dispose of scrapped units environmentally-responsibly Scrapped units consist of valuable recyclable materials that should be taken to a recycling centre. Batteries, oil and similar products must not be allowed to contaminate the environment. [. . . ] S Screw the high pressure hose (4) to the outlet of the HP-injector (2) and tighten hand tight. Tighten the injector cartridge hand tight with a flat screwdriver 12x2. 13 English s Unscrew the standard injector cartridge with a flat screwdriver 12x2. S Push O-rings (3) onto the injector 1b) Assembly with HD 10/25 SX, HD 13/18 SX s Switch off the high pressure cleaner. Cartridge from the nozzle set (4) and coat with a thin layer of silicone grease. Tighten the injector cartridge hand tight with a flat screwdriver 12x2. *Part of the nozzle pack s Unscrew the fastening screw (1) of the hood. 1c) Assembly in heated units Here the existing dosing system in the unit is used. *Part of the nozzle pack s Unscrew the sealing screw (1) with a size 8 Allen key. Mount the switchable jet pipe (only with the Inno-Foam-Set) s Unscrew the standard jet pipe from the 3. To the Foam Set, – on the short pipe of the switchable jet pipe, or – replace the standard high pressure nozzle by a foam nozzle. S Screw the pre-assembled foam nozzle (1) to the jet pipe (5) and tighten it with an open-ended wrench size 27. 15 English Recommended cleaning agents RM 57 ASF Foam cleaner , neutral Foam cleaner for slightly greasy , oily- and protein contamination. RM 58 ASF Foam cleaner, alkaline Foam cleaner for cleaning floor and wall tiles and containers. [. . . ] S Clean the stainless steel grille for A* = position B* = CHEM (%) 10 minutes in boiling water or overnight in the ultrasonic bath. 80 Svenska Montering Erforderliga tillbehörsdelar s För att anpassa Foam-Set till respektive Munstyckspaket för andra högtrycksaggregat utan slangvinda med flöden från: högtrycksaggregat, måste dessutom ett munstyckspaket beställas: över 500 till 600 l/h (över 8, 3 till 10 l/min) över 600 till 700 l/h (över 10 till 11, 8 l/min) för HD 10/25 SX för HD 13/18 SX 2. 640-695 över 700 till 1000 l/h (över 11, 6 till 16, 6 l/min) över 1000 till 1300 l/h (över 16, 6 till 21, 6 l/min) HD 1000 Si 2 640-870 2 640-687 2 640-688 2 640-689 2. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KARCHER INNO-FOAM-SET




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KARCHER INNO-FOAM-SET will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.