User manual KARCHER WD 3500P

[. . . ] Children should be supervised, to ensure that they do not play with the device. € Switch the appliance off after every use and prior to every cleaning/maintenance procedure. € The appliance may not be used in areas where a risk of explosion is present. ṇ Electrical connection The appliance may only be connected to alternating current. [. . . ] (see description / illustration ) Suction hose with handle Adapter  To connect the suction hose with an electric tool. (see description / illustration )  Adapt the adapter to the connection diameter of the electric tool using a knife if necessary. Operation ṇ Always work with an inserted cartridge filter - during wet as well as dry vacuum cleaning!Before Startup  Slide the suction hose into the connection, it will lock into place. (see description / illustration ) In order to disconnect it, push down with your thumb and pull the suction hose out. 5 m  Illustration Mount loose parts delivered with appliance prior to start-up.  Illustration Recommendation: To vacuum fine dust , use the filter bag. Start up  Connect both suction pipes and connect them to the suction hose. Floor nozzle (with inserts)  Use the appropriate insert for vacuuming on hard surfaces and carpets. (see description / illustration ) Hard surfaces, wet vacuuming: Use the insert with 2 rubber lips (or with a rubber lip and bristle strips). Hard surfaces, dry vacuuming: Use the insert with 2 bristles (or with a rubber lip and bristle strips). (see description / illustration ) The filling level of the filter bag depends on the dirt that is sucked in. The filter bag needs to be replaced more frequently while sucking in fine dust, sand, etc. Clogged filter bags can burst - therefore make sure to replace the filter bag in a timely manner!σ Caution: Always use a pre-separator while vacuuming ashes and soot (order no. 12 EN – 3 Wet vacuum cleaning Finish operation  Attach the accessories to vacuum moisture or wetness to the suction pipes or directly to the handle. Note: If the container is full a float closes the suction opening and the appliance works at a higher speed. Working with electrical power tools  Turn off the appliance and disconnect the mains plug. Empty the container  Illustration Remove the appliance head and empty the reservoir. Storing the appliance  Illustration Stow away the mains cable and accessory at the machine. σ Adapt the adapter to the connection diameter of the electric tool using a knife if necessary. σ Illustration Connect the adapter to the handle of the suction hose and connect it to the electric tool connection. [. . . ] Alternatively you may write or E-mail to the address below: Karcher (UK) Limited Karcher House Beaumont Road Banbury Oxon, OX16 1TB E-mail: info@karcher. Connection output of appliance socket Mains fuse (slow-blow) Container capacity Water intake with handle Water intake with floor nozzle Power cord Sound pressure level (EN 60704-2-1) Weight (without accessories) Subject to technical modifications!General notes Warranty The terms of the guarantee applicable in each country have been published by our respective national distributors. We will repair possible faults on your unit free of charge within the warranty period, insofar as the faults are caused by material defects or defective workmanship. [. . . ]