User manual KENWOOD KAF-1030
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KENWOOD KAF-1030. We hope that this KENWOOD KAF-1030 user guide will be useful to you.
You may also download the following manuals related to this product:
KENWOOD KAF-1030 (434 ko)
Manual abstract: user guide KENWOOD KAF-1030
Detailed instructions for use are in the User's Guide.
[. . . ] STEREO INTEGRATED AMPLIFIER
KAF-3030R KAF-1030
INSTRUCTION MANUAL
KENWOOD CORPORATION
B60-4527-08 (EN)
Before applying power
Units are designed for operation as follows.
Caution: Read this page carefully to ensure safe operation.
KAF-3030R/1030 (En)
2
Europe and UK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only
Safety precautions
WARNING :
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
Unpacking
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. If your unit is damaged or fails to operate, notify your dealer immediately. [. . . ] If your amp or receiver does not have a system control terminal, do not connect any system control cords to the system control terminals on the other components. Do not connect system control cords to any components other than those specified by KENWOOD. Be sure the system control plugs are inserted all the way in to the system control terminals.
The system control operations
Remote Control The remote control supplied with this unit can also be used to control the other components in the system. Automatic Operation (except [XR] and [XS-8] equipment) When you start playback from a source component, the input selector on this unit switches to that component automatically. Synchronized Recording (except [XR] and [XS-8] equipment) Lets you synchronize recording with the start of playback when recording from CD or MD.
KAF-3030R/1030 (En)
8
Connection of speakers
Connect the speakers as shown below, ensuring that bare wires do not make contact with other terminals.
1 Strip coating.
Speaker system A RIGHT ª ·· ª LEFT
2 Loosen.
SIGNAL GND PHONO
TAPE REC PLAY L
MD/CD-R REC PLAY
TUNER
AUX
Adv. DA /CD
SYSTEM CONTROL
A
+
B
+
R
R L SPEAKERS (A or B : 416, A and B : 816)
3 Insert.
ª
··
ª
RIGHT Speaker system B
4 Secure.
LEFT
· Never short-circuit the + and speaker cords. · If the left and right speakers are connected inversely or if the
speaker cords are connected with reversed polarity, the sound becomes unnatural with ambiguous acoustic image positioning. Be sure to connect the speakers and speaker cords correctly.
Speaker impedance
When only one pair of speakers is connected to A or B speaker terminals, use the speakers having an impedance of 4 to 16 . When two pairs of speakers are connected to both A and B terminals simultaneously, use the speakers having an impedance of 8 to 16 . In this case, connecting a speaker having an impedance of less than 8 may cause malfunction of the amplifier.
Notes
1 Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connection cords without removal of the power cord can cause malfunctions or damage to the unit. 3 Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit.
Controls and indicators
KAF-3030R/1030 (En)
Main unit
9
KAF-1030
KAF-1030
KAF-1030
INPUT SELECTOR
TUNER TAPE PHONO
POWER MUTE
ON OFF
CD
LOUDNESS
SOURCE DIRECT
MD / CD-R
AUX
3
STEREO INTEGRATED AMPLIFER
4
KAF-3030R
5
6
VOLUME CONTROL
7
8
9
0
1
STANDBY
INPUT SELECTOR
TUNER Adv. DA / CD TAPE PHONO
POWER
ON
OFF
SPEAKERS OFF A B A+B
BASS
TREBLE
BALANCE
SOURCE DIRECT
DIRECT MD / CD-R
PHONES L R
MIN MAX
AUX
2 !
Linear
TRAIT
@
#
$
%
1 STANDBY indicator (KAF-3030R only) 2 POWER switch 3 SPEAKERS A/B switches
Turn to select the A and/or B speakers systems.
@ @ @ # # # @ #
9 LOUDNESS key/indicator (KAF-1030 only)
Use to emphasize deep bass sounds.
# !PHONES jack
Used for headphone listening.
4 BASS knob
To adjust low frequencies.
@ SOURCE DIRECT key/indicator
To listen to a source with high quality sound.
5 TREBLE knob
To adjust high frequencies.
6 BALANCE knob
Adjust the volume balance between left and right.
# Adv. DA / CD DIRECT key/indicator (KAF-3030R only)
To listen to a Advanced Digital Audio source with high quality sound.
$
7 VOLUME CONTROL knob
Adjust the volume.
$ INPUT SELECTOR knob
Turn to select the input sources.
@ @
8 MUTE key/indicator (KAF-1030 only)
Mute the sound temporarily.
% INPUT indicator
An indicator lights for the source selected with the INPUT SELECTOR knob.
About the standby indicator (KAF-3030R only)
This unit has a standby indicator that lights to show that a small amount of current is being supplied to the unit in order to preserve the memory. When the Standby indicator is lit, the amplifier can be switched ON/STANDBY from the remote control.
KAF-3030R/1030 (En)
10
Remote control unit (KAF-3030R only)
The part of the illustration designates keys that can be used to operate KENWOOD components connected with the system control. The rest of the illustration designates keys that have the same functions as the keys on the main unit.
DISC SKIP key
Only used for the Autochanger CD player.
CD player operation keys
4 A B 8 4
¢
CD
7 1
6 ¡ 3 ¡ 3
TUNER
TAPE operation keys
These keys perform the same operations as the corresponding keys on the cassette deck. However, operations requiring simultaneous pressing of two keys are not possible.
DISC SKIP
7 TAPE 2 ¶ 1
¢ MD 7 ¶
MD recorder operation keys
8
AUX
fi P. CALL %
MUTE
TUNER operation keys
TUNER Adv. DA/CD
TAPE
MD
PHONO
%
VOLUME CONTROL
MUTE key
Mute the sound temporarily.
INPUT SELECTOR keys
POWER
SOURCE DIRECT Adv. DA/CD DIRECT
fi
REMOTE CONTROL UNIT RC-A0301
VOLUME UP (%), DOWN (fi) keys
Adjust the volume.
POWER key
Use to switch the power ON/ STANDBY when the POWER switch is turned ON.
SOURCE DIRECT key
Switch SOURCE DIRECT ON/ OFF.
Adv. [. . . ] 1 (100 W max. ) Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . W: 440 mm H: 95 mm D: 400 mm Weight (net) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7. 8 kg
Caution: Read this page carefully to ensure safe operation.
KAF-3030R/1030 (En)
KAF-1030
Rated output power (DIN) 1 kHz at 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 W + 40 W at 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KENWOOD KAF-1030
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KENWOOD KAF-1030 will begin.