User manual KYOCERA KM-C4008

[. . . ] · Standard equipment C4008: Duplex Unit and one 500-sheet capacity drawer[cassette] NOTE: This Operation Guide contains information that corresponds to using both the inch and metric versions of this copier. When the difference in a message is only one of upper- and lower-case spelling, we have listed the information as it specifically pertains to the inch version of this machine. When there is even a slight difference in the message, we have listed the information for the inch version followed, in brackets, by the corresponding information for the metric version. All rights reserved. No part of this material may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or by any information storage and retrieval system, without permission in writing from the Publisher. [. . . ] (Full-Co. )" under the "Setting item" column on the left side of the touch panel and then press the "Change #" key. Inch specifications Metric specifications Copy limitation (All) (1~999, 999) Limited value Back Close Limit in use 0007 1st Sales Dept. Limitation Value Close No limit Counter limit Is not permitted 999, 999 clear No limit No limit No limit No limit No limit No limit Change # Management - Management edit - New register Default setting - Management - Management edit 5 Press the "Close" key. The touch panel will return to the screen in step 2. Metric specifications Limit in use 0007 1st Sales Dept. Limitation Value Close No limit No limit No limit No limit No limit No limit Change # Default setting - Management - Management edit 7-15 Section 7 COPIER MANAGEMENT 3 To set the maximum number of full color copies that can be made under this ID-code, press the "Counter limit" key and proceed to the next step. To allow unlimited full color copies, press the "No limit" key, and to cancel full color copying privileges completely, press the "Is not permitted" key. (Full-Co. ) Back Close Printing restrictions (All) Perform the following procedure when you want to set the maximum number of printouts that can be made under the corresponding department ID-code. NOTES · This setting limits the maximum number of full-color and black and white printouts that can be made in total. · This setting will only be available when "On" is selected as the "Printer function management ON/OFF" setting. No limit Counter limit Is not permitted Management - Management edit - New register 1 Back Close Metric specifications Copy limit. (Full-Co. ) Access the screen that contains the copy restriction setting items. (See "Accessing the copy management menu screen" on page 7-3 or "Change restrictions for use" on page 7-23. ) Inch specifications No limit Counter limit Is not permitted Management - Management edit - New register Management edit Department 01 02 0001 0014 00000015 00000016 00000017 1st Sales Dept. correction Delete Register Close Limit in use Down 001/010 NOTE If you want to quit the displayed setting without changing it, press the "Back" key. The touch panel will return to the screen in step 2. Default setting - Management Metric specifications Management edit Close 1st Sales Dept. correction Delete Register 4 Use the numeric keys on the keypad to enter the maximum number of full color copies that can be made under this ID-code. (Full-Co. ) (1~999, 999) Limited value Back Close Department 01 02 0001 0014 00000015 00000016 00000017 Limit in use Down 001/010 Default setting - Management No limit Counter limit Is not permitted 999, 999 clear Management - Management edit - New register Metric specifications Copy limit. (Full-Co. ) (1~999, 999) Limited value Back Close No limit Counter limit Is not permitted 999, 999 clear Management - Management edit - New register 5 Press the "Close" key. The touch panel will return to the screen in step 2. 7-16 Section 7 COPIER MANAGEMENT 2 Select "Printer limit. (All)" under the "Setting item" column on the left side of the touch panel and then press the "Change #" key. Limitation Value Close 4 Use the numeric keys on the keypad to enter the maximum number of printouts that can be made under this ID-code. (All) (1~999, 999) Limited value Back Close No limit No limit No limit No limit No limit No limit Change # No limit Counter limit Is not permitted 999, 999 clear Default setting - Management - Management edit Management - Management edit - New register Metric specifications Limit in use 0007 1st Sales Dept. (All) (1~999, 999) Limited value Back Close No limit No limit No limit No limit No limit No limit Change # No limit Counter limit Is not permitted 999, 999 clear Default setting - Management - Management edit Management - Management edit - New register 3 To set the maximum number of printouts that can be made under this ID-code, press the "Counter limit" key and proceed to the next step. To allow unlimited printing, press the "No limit" key, and to cancel printing privileges completely, press the "Is not permitted" key and proceed to step 5. The touch panel will return to the screen in step 2. No limit Counter limit Is not permitted Management - Management edit - New register Metric specifications Printer limit. [. . . ] 6-57 Selecting functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Selecting the color mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Selecting the image quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Selecting the location of copy ejection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]