User manual LENOVO L2261

[. . . ] L2261 Wide Flat Panel Monitor User's Guide Product numbers 6521-HD1 6521-HG1 6521-HH1 L2261wA First Edition (September 2009 ) © Copyright Lenovo 2009 . LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C. F. R. 2. 101 with limited and restricted rights to use, reproduction and disclosure. LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant a General Services Administration "GSA" contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. [. . . ] Reference information This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information. Monitor specifications Table 3-1. Monitor specifications for type-model L2261wA Dimensions Height Depth Width Stand VESA mount Image Tilt Supported Viewable image size Maximum height Maximum width Pixel pitch Power input Supply voltage Max supply current Power consumption Note: Power consumption figures are for the monitor and the power supply combined. Video input (Analog) Normal operation Standby/Suspend Off Input signal Horizontal addressability Vertical addressability Clock frequency Video input (Digital) Interface Input Signal Horizontal addressability Vertical addressability Clock frequency © Copyright Lenovo 2009. © 391. 0 mm (15. 39 in. ) 180. 2 mm (7. 09 in. ) 512. 3 mm (20. 17 in. ) Range: -5°, +20° 75 mm (2. 95 in. ) 546. 86 mm(21. 53 in. ) 476. 64 mm(18. 77 in. ) 268. 11 mm (10. 56 in. ) 0. 248 mm (0. 01 in. ) (V) 90-264VAC (100~240VAC+/-10%) 1. 5 A < 35 W <1W(Analog), < 1W(Digital) < 0. 5W at 100Vac & 240Vac Analog Direct Drive, 75 ohm 0. 7V 1920 pixels (max) 1080 lines (max) 210 MHz DVI VESA TMDS (Panel LinkTM) 1920 pixels (max) 1080 lines (max) 170 MHz Chapter 3. - 3-1 Table 3-1. Monitor specifications forfor type-model 6521-HB Communications Supported Display Modes (VESA Standard modes between noted ranges) Temperature VESA DDC Horizontal frequency Vertical frequency Native Resolution Operating Storage Shipping Humidity Operating Storage Shipping CI 30 kHz - 83 kHz(Pixel clock <210MHz) 50 Hz - 76 Hz (Pixel clock <210MHz) 1920 x 1080 at 60 Hz 0° to 40° C (32° to 104° F) -20° to 60° C (-4° to 140° F) -20° to 60° C (-4° to 140° F) 8 % to 80% non-condensing 5% to 95% non-condensing 5% to 95% non-condensing Chapter 3. 3-2 Troubleshooting If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem. Troubleshooting Problem The words "Out of Range" are shown on the screen, and the power indicator is flashing blue. Possible cause The system is set to a display mode which is not supported by the monitor. Suggested action If you are replacing an old monitor, reconnect it and adjust the display mode to within the specified range for your new monitor. If using a Windows system, restart the system in safe mode, then select a supported display mode for your computer. The video signal cable is not connected with the monitor or system completely. Be sure the signal cable is firmly plugged into the system and monitor. "Understanding power management" on page 2-8 "Connecting and turning on your monitor" on page 1-4 "Adjusting your monitor image" on page 2-3 "Adjusting your monitor image" on page 2-3 "Connecting and turning on your monitor" on page 1-4 Reference "Selecting a supported display mode" on page 2-7 · · · · · · Screen is blank and power indicator is steady amber or flashing blue The monitor is in Standby/Suspend mode · · Chapter 3. 3-3 Table 3-2. Troubleshooting Problem The power indicator is blue, but there is no image. Possible cause The video signal cable is loose or disconnected from the system or monitor. One or more of the pixels appear discolored · Fuzzy lines in text or a blurry image. This is a characteristic of the LCD technology and is not an LCD defect. · Image setup has not been optimized Your system Display Properties setting have not been optimized. Suggested action Be sure the video cable is connected with the system properly. If there are more than five pixels missing, contact the Support Center. Adjust the resolution settings on your system to match the native resolution for this monitor: 1920 x 1080 at 60 Hz. When working in the native resolution, you may find additional improvements by adjusting the Dots Per Inch (DPI) setting on your system. [. . . ] Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. [. . . ]