User manual MAKITA LS1040S DC24WA
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAKITA LS1040S. We hope that this MAKITA LS1040S user guide will be useful to you.
Manual abstract: user guide MAKITA LS1040SDC24WA
Detailed instructions for use are in the User's Guide.
[. . . ] ENGLISH
Compound Miter Saw
MODEL LS1040 MODEL LS1040S
001854
DOUBLE INSULATION
INSTRUCTION
MANUAL
WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
SPECIFICATIONS
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LS1040/LS1040S Blade diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255 mm -260 mm Hole diameter For all countries other than European countries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Return tool to a Makita service center for proper repairs BEFORE further usage. NEVER tape down or defeat purpose and function of lock-off button.
·
1. Switch trigger
·
·
ASSEMBLY
·
CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool.
Installing or removing saw blade
CAUTION: Always be sure that the tool is switched off and unplugged before installing or removing the blade. · Use only the Makita socket wrench provided to install or remove the blade. Failure to do so may result in overtightening or insufficient tightening of the hex bolt. ·
001858
1 3
To remove the blade, use the socket wrench to loosen the hex bolt holding the center cover by turning it counterclockwise. Center cover Socket wrench Hex bolt Blade guard
4
001859
Press the shaft lock to lock the spindle and use the socket wrench to loosen the hex bolt clockwise. Shaft lock
10
001787
2
1
4
3
To install the blade, mount it carefully onto the spindle, making sure that the direction of the arrow on the surface of the blade matches the direction of the arrow on the blade case. Install the outer flange and hex bolt, and then use the socket wrench to tighten the hex bolt (left-handed) securely counterclockwise while pressing the shaft lock.
1. Spindle Flange Saw blade Flange Hex bolt Ring
5
CAUTION: For all countries other than European countries · The silver ring 25. 4 mm in outer diameter is factory-installed onto the spindle. The black ring 25 mm in outer diameter is included as standard equipment. Before mounting the blade onto the spindle, always be sure that the correct ring for the arbor hole of the blade you intend to use is installed onto the spindle. For European countries · The ring 30 mm in outer diameter is factory-installed between the inner and outer flanges. Install the outer flange and hex bolt, and then use the socket wrench to tighten the hex bolt (left-handed) securely counterclockwise while pressing the shaft lock. Make sure shaft lock has released spindle before making cut.
001861
Dust bag
The use of the dust bag makes cutting operations clean and dust collection easy. When the dust bag is about half full, remove the dust bag from the tool and pull the fastener out. Empty the dust bag of its contents, tapping it lightly so as to remove particles adhering to the insides which might hamper further collection. NOTE: If you connect a Makita vacuum cleaner to your saw, more efficient and cleaner operations can be performed.
1 2
3
1. Fastener
Securing workpiece
WARNING: It is extremely important to always secure the workpiece properly and tightly with the vise. Failure to do so can cause the tool to be damaged and/or the workpiece to be destroyed. Also, after a cutting operation, DO NOT raise the blade until the blade has come to a complete stop.
·
11
001549
1
2
·
CAUTION: When cutting long workpieces, use supports that are as high as the top surface level of the turn base. Do not rely solely on the vertical vise and/ or horizontal vise to secure the workpiece. [. . . ] Turn the turn base so that the pointer points to 0° on the miter scale. Tighten the grip and loosen the hex bolts securing the guide fence using the socket wrench.
1. Hex bolt
16
002259
Lower the handle fully and lock it in the lowered position by pushing in the stopper pin. Square the side of the blade with the face of the guide fence using a triangular rule, try-square, etc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAKITA LS1040S
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAKITA LS1040S will begin.