User manual MAXDATA 110T
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAXDATA 110T. We hope that this MAXDATA 110T user guide will be useful to you.
You may also download the following manuals related to this product:
MAXDATA 110T (1185 ko)
MAXDATA 110T (1111 ko)
Manual abstract: user guide MAXDATA 110T
Detailed instructions for use are in the User's Guide.
[. . . ] User Manual Notebook
i
Notice
The information in this user`s manual is subject to change without notice. THE MANUFACTURER OR RESELLER SHALL NOT BE LIABLE FOR ERRORS OR OMISSIONS CONTAINED IN THIS MANUAL AND SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES, WHICH MAY RESULT FROM THE PERFORMANCE OR USE OF THIS MANUAL. No part of this manual may be photocopied or reproduced in any form without prior written authorization from the copyright owners. Copyright 2001 All rights reserved.
Microsoft and Windows are registered trademarks of Microsoft Corporation. [. . . ] Find the keyboard latches A, B and C near the bottom edge of the keyboard refering to the figure as below. It will retract when pressed and revert back to its original position when released.
Illustration 4-3
Fn
Ctrl
Ctrl
Alt
Alt
Del
Latch A
Latch B Bottom Edge of Keyboard
Latch C
5. If the keyboard does not pop up, try to gently lift it up just over the latch. Carefully lift up the bottom edge of the keyboard and the following is revealed.
4-7
USER`S MANUAL
PCB Connector Slot
Original Memory Socket
Fixing Screws DIMM Module
Expansion Memory Socket
Latch A
Latch B
Latch C
Flexible PCB (The bridge between keyboard and the mainboard. ) Keyboard
Illustration 4-4
Note: Your notebook has been tested with a wide range of DIMM on the market. Check with your notebook vendor for a list of compatible DIMM for your notebook.
7. Press out on the latches located on both edges of the socket at the same time. The DIMM should pop up to an angle of 30 degree.
4-8
Section 4 UPGRADING YOUR NOTEBOOK
9. Slide the DIMM at an angle of approximately 30 degrees into the empty memory socket. Then press it firmly so that the contact edge is driven into the receiving socket.
Note: Notice the notches on the DIMM. The notches should fit nicely with the socket.
Notch
Illustration 4-6 DIMM Module Memory Socket 11. Pivot the DIMM until the latches on both sides of the socket snap into place. You have just completed the memory upgrade.
4-9
USER`S MANUAL
Installing the DIMM Module In The Expansion Socket
To remove the memory module, do the following: 1. Follow steps 1~7 in the above section, Installing the DIMM Module In The Memory Socket. Hold the extended memory module at a 30-degree angle and slide it into the empty momery socket.
Notch
DIMM Module Memory Socket 3. Align the small notch in the module with the socket on the connector and gently push it in and down until it clicks in place. Pivot the DIMM until the latches on both sides of the socket snap into place. You have just completed the memory upgrade.
4-10
Section 4 UPGRADING YOUR NOTEBOOK
Removing the DIMM Module In The Expansion Socket
To remove the memory module, do the following: 1. Follow steps 1~7 in the above section, Installing the DIMM Module In The Memory Socket. Press out on the latches located on both edges of the expansion socket at the same time. Power on the notebook and when it starts up note if the memory count has decreased to the original memory capacity. You have completed the removal of the DIMM.
4-11
USER`S MANUAL
4-12
Section 5 TROUBLE SHOOTING
SECTION 5
TROUBLE SHOOTING
In this section, you will learn how to solve common hardware and software problems.
5-1
USER`S MANUAL
Your notebook has been fully tested and complies with the system specifications before shipping. However, incorrect operations and/or mishandling during shipment may cause problems. [. . . ] If it contacts the eye, flush the eye with water for 15 minutes and seek medical attention. n Do not charge the battery pack if the ambient temperature exceeds 45oC (113oF). n Do not expose the battery pack to high storage temperatures (above 60oC, 140oF). n When discarding a battery pack, contact your local waste disposal provider regarding local restrictions on the disposal or recycling of batteries. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAXDATA 110T
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAXDATA 110T will begin.