User manual PANASONIC CQ-DF200W
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC CQ-DF200W. We hope that this PANASONIC CQ-DF200W user guide will be useful to you.
Manual abstract: user guide PANASONIC CQ-DF200W
Detailed instructions for use are in the User's Guide.
[. . . ] Panasonic is not liable for any problems resulting from your own installation of the unit.
First Time Power On
This manual uses pictographs to show you how to use the product
Label Indications and Their Locations
CAUTION
LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.
CLASS 1 LASER PRODUCT
ignition 1 Set your car'sACC or ON switch to the position. Note: If you would like to turn on the power and make the demonstration message appear, hold down [SRC] (PWR) for more than 4 seconds (ACC ON).
VO L
CQ-DF200W
TUNE/TRACK
ER LD FO
D·M
PWR
PTY
Warning
SRC
MUTE/SQ
SCROLL
RANDOM
SCAN
REPEAT
TA/AF
1
2
3
4
5
6
DISP
This pictograph intends to alert you to the presence of important operating instructions and installation instructions. Failure to heed the instructions may result in severe injury or death.
Caution
This pictograph intends to alert you to the presence of important operating instructions and installation instructions. [. . . ] If leads must be run over sharp metal edges, protect the leads by winding them with vinyl tape or similar protection.
This product utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Caution Label
CAUTION - LASER RADIATION WHEN OPEN. ATTENTION RAYONNEMENT LASER SI OUVERT, ÉVITER TOUTE EXPOSITION AU FAISCEAU. UNDVIK ATT UTSÄTTAS FÖR STRÅLEN.
(CQ-DF200WW)
Warning
Observe the following warnings when using this unit.
Observe the following warnings when installing.
Disconnect the lead from the negative () battery terminal before installation.
Do not expose the unit to direct sunlight or excessive heat.
Otherwise these will raise the interior temperature of the unit, and it may lead to smoke, fire, or other damage to the unit.
Caution Be sure to select OFF when your car has no ACC position in the ignition switch. (a "Function Settings") The following functions are available. (Default: off) ¡ The power is turned on automatically when inserting a disc. Then open the hole from outside if possible.
Installation Angle
The product should be installed in a horizontal position with the front end up at a convenient angle, but not more than 30°. The user should bear in mind that in some areas there may be restrictions on how and where this unit must be installed. Consult your dealer for further details.
5 Press [DISP].
Minute blinks
Do not use the unit when it is out of order.
If the unit is out of order (no power, no sound) or in an abnormal state (has foreign objects in it, is exposed to water, is smoking, or smells), turn it off immediately and consult your dealer.
Refer fuse replacement to qualified service personnel.
When the fuse burns out, eliminate the cause and have it replaced with the fuse prescribed for this unit by a qualified service engineer. Incorrect replacement of the fuse may lead to smoke, fire, and damage to the product.
Never install the product in a location where it interferes with your field of vision. Never have the power cord branched to supply other equipment with power. AM (LW/MW) mode: Band/frequency CT (Clock Time) FM (not RDS) mode: Band/frequency PS CT RDS mode: PS (Programme Service name) Band/frequency CT [SRC] (Source) selects a source. [u] (Eject) ejects the disc.
BAND
APM
Radio Source Display
Disc slot takes a disc in with the printed side facing up. Notes: ¡ The power will be turned on automatically when a disc is loaded at ACC ON. ¡ A disc which has both CD-DA data and MP3/WMA data on it may not be reproduced normally.
[6] [7] skip to the previous/next track/file in the player mode. Hold down either of them for fast reverse/fast forward.
CD-DA mode display
Track number Play time
Display change
Press [DISP] to change the display.
Disc Player (CD-DA disc): Disc Player (MP3/WMA disc):
Normal Disc title Play Mode indicators Track title Normal Play time Folder name/ Album* File name/ Title, artist* Clock
Player Source Display
VO
BAND
APM
L
CQ-DF200W
/TRAC K TUNE
ER LD FO
BAND
VO L
CQ-DF200W
/TRAC K TUNE
ER LD FO
MP3/WMA mode display
lights when folder random/repeat/scan is on. Folder number File number Clock
D·M
D·M
PUSH SEL
APM
PUSH SEL
PWR
PTY
PTY
PWR
SRC
MUTE/SQ
SCROLL
RANDOM
SCAN
REPEAT
TA/AF
SRC
MUTE/SQ
SCROLL
RANDOM
SCAN
REPEAT
TA/AF
1
2
3
4
5
6
DISP
1
2
3
4
5
6
DISP
/TRAC K TUNE
[DISP] (Display) switches the information on the display.
VO L
CQ-DF200W
PUSH SEL
ER LD FO
D·M
*ID3/WMA Tag On/Off
Hold down [3] for more than 2 seconds. Play Mode indicators album title and song title/ artist name are displayed. ¡ "NO TEXT" is displayed when there is no information on the disc.
PWR
PTY
SRC
MUTE/SQ
SCROLL
RANDOM
SCAN
REPEAT
TA/AF
1
2
3
4
5
6
DISP
[SRC] (Source) selects a source. (Hold it down for more than 1 second. )
[SRC] (Source) selects a source.
[1] to [6] selects a preset station in the radio source, and presets the current station. (Hold it down for more than 2 seconds. )
[TUNE ]] [TUNE [] down/up the frequency. (Hold it down for more than 0. 5 seconds and release it for seek tuning. )
[DISP] (Display) switches the information on the display.
[}] [{] skip to the previous/next folder.
Power On/Off
Set your car's ignition switch to the ACC or ON position.
SQ (Sound Quality)
SQ is a function that can call up various sound types at the touch of button in accordance with your listening music type.
Power on: Press [SRC] (PWR). [. . . ] (a "Function Settings")
PWR
PTY
PWR
/TRAC K TUNE
D·M
PUSH SEL
CQ-DF200W
ER LD FO
D·M
PUSH SEL
MUTE/SQ SCROLL RANDOM SCAN REPEAT
PTY
SRC
TA/AF
1
2
3
4
5
6
DISP
[DISP] (Display) exits from the audio menu.
SRC
MUTE/SQ
SCROLL
RANDOM
SCAN
REPEAT
TA/AF
1
2
3
4
5
6
DISP
[DISP] (Display) exits from the function menu.
Trouble
Check point
Trouble
Check point
AF (Alternative Frequency)
The following functions are available when the AF mode is active ( lights).
Common
Start the engine. (Or turn the ignition switch to the ACC position. ) Verify the wiring. (battery lead, power lead, ground lead, etc. ) Fuse blown (Contact the nearest Panasonic Service Centre. ) Ask a professional for fuse replacement. Wait until the dew disappears before turning on the unit.
Radio
Frequent noise
Tune in to another station of high-intensity waves. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC CQ-DF200W
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC CQ-DF200W will begin.