User manual PANASONIC TX-L47ET61B
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PANASONIC TX-L47ET61B. We hope that this PANASONIC TX-L47ET61B user guide will be useful to you.
Manual abstract: user guide PANASONIC TX-L47ET61B
Detailed instructions for use are in the User's Guide.
[. . . ] (A damaged lead may cause fire or electrical shock. ) Do not move the TV with the lead plugged in the socket outlet. Do not place a heavy object on the lead or place the lead near a high-temperature object. Do not use a damaged mains plug or socket outlet.
If you find any abnormality, remove the mains plug immediately!
AC 220-240 V 50 / 60 Hz
Power source
50 / 60 Hz AC.
This TV is designed to operate on 220-240 V,
Do not place foreign objects inside the TV
Do not allow any objects to drop into the TV through
the air vents (fire or electrical shock may result).
Do not remove covers NEVER modify the TV yourself
(High-voltage components may cause serious electrical shock. ) Have the TV checked, adjusted, or repaired at your local Panasonic dealer.
Do not place the TV on sloped or unstable surfaces
The TV may fall off or tip over.
Keep liquids away from the TV
To prevent damage which may result in fire or shock
hazard, do not expose this appliance to dripping or splashing. Do not place containers with water (flower vase, cups, cosmetics, etc. ) above the TV. [. . . ] 18).
Select a channel to list
DVB-T Favourites Editor
All DVB-T Channels 1 7 14 70 72 105 719 720 BBC One Wales BBC THREE E4 CBBC Channel Cartoon Nwk BBCi BBC Radio Wales BBC Radio Cymru Favourites1
Sorting 123. . .
To sort channel names in alphabetical order
select
blue
To display other Favourites To change the category
red
green
Add it to the Favourites list
DVB-T Favourites Editor
All DVB-T Channels 1 7 14 70 72 105 719 720 BBC One Wales BBC THREE E4 CBBC Channel Cartoon Nwk BBCi BBC Radio Wales BBC Radio Cymru Favourites1 1 BBC One Wales
Sorting 123. . .
To add all channels to the list
A channel is added
yellow
Channel position numbers can be swapped in
Channel List.
Note
To edit Favourites list
Select the field of Favourites to edit and:
To delete the channel To delete all channels
Tuning and Editing Channels (DVB)
To name the Favourites
Set characters one by one
red
User input
yellow
Store
RETURN
select
EFG YZ efg yz( H I JKLMNOPQRST 0123456789!:# h i j k lmnopqr s t )+-. *_
Name
A U a u B V b v C W c w D X d x
set
You can set characters by using numeric buttons. 58)
To move the channel
Store
RETURN
green
Select the new position
Confirm
green
Skip unwanted DVB channels, Edit DVB Channels Channel List
You can hide unwanted DVB channels. Use this function to skip unwanted channels.
Select a channel and reveal / hide
DVB-T Channel List
70 72 105 719 720 1 7 CBBC Channel Cartoon Nwk BBCi BBC Radio Wales BBC Radio Cymru BBC ONE Wales BBC THREE
Sorting 123. . .
reveal / hide select
: reveal : hide (skip)
1 ZDF
Coronation Street 19 : 30 - 20 : 00
To reveal all channels
yellow
Advanced
To edit channels
Channel position
19:35 Now
All DVB-T Channels Change category For info press
You can also edit each channel in Channel List.
To change the category
red green
To swap the channel position (if available) To move the channel position (if available) To sort channel names in alphabetical order
Enter the new position number Store
green
Store
green
green blue
Select the new position
Set DVB channel manually Manual Tuning
Normally use "Auto Setup" or "Update Channel List" to retune DVB channels. If tuning has not been done completely or for adjusting the direction of the aerial, use this function. All channels found will be added to the Channel List.
DVB-T Manual Tuning
Frequency Signal Quality Analogue Scan Signal Strength No.
[CH21] 474, 00 MHz
0 21 0 Channel Name
Type
1068 10 New
select channel adjust frequency search
Free TV: 0
Pay TV: 0
Radio: 0 Stopped
Data: 0
Set where the level of "Signal Quality" becomes the maximum.
33
Tuning and Editing Channels
(Analogue)
You can retune channels or skip unwanted channels, edit channels etc.
1
INPUT TV AV ASPECT MENU N DIRECT TV REC EXIT
Select Analogue
TV
2 3 4
Display the menu
MENU
Select "Setup"
Main Menu
Picture Sound
OPTION
RETURN
access
TEXT STTL INDEX HOLD
Setup
select
Select "Analogue Tuning Menu"
Setup Menu
access
PROGRAMME
Off Timer Off Link Settings Child Lock Analogue Tuning Menu Access Language Display Settings Common Interface System Menu Other Settings
select
5
TV
Select one of the following functions
Analogue Tuning Menu
access
Access Access Access
Channel List Auto Setup Manual Tuning
To return to TV
EXIT
select
"Retuning from Setup Menu" (p. 31)
6
Set
34
Skip unwanted Analogue channels, Edit Analogue channels Channel List
You can hide unwanted Analogue channels. Use this function to skip unwanted channels.
Select a channel and reveal / hide
Analogue Channel List
1 BBC1 2 ***** 3 ***** 4 5 6 7
reveal / hide select
: reveal : hide (skip)
To reveal all channels
yellow
To edit channels
You can also edit each channel in Channel List. Select a channel to edit and:
Channel position Channel name
3 ITV
itv CH23 Mute Encrypted Radio 23:35
All Analogue Channels
For info press
AD
Subtitles TXT Multi Audio
45
To retune each channel (Manual Tuning) To move the channel position To rename the channel name
green
red
(see below)
Tuning and Editing Channels (Analogue)
Select the new position
Store
green
Set characters one by one
blue
Edit channel name
Store
select
RETURN
Name
A U a u B V b v C W c w D X d x EFG YZ efg yz( H I JKLMNOPQRST 0123456789!:# h i j k lmnopqr s t )+-. *_
set
(maximum: five characters)
You can set characters by using numeric buttons.
"Characters table for numeric buttons" (p. 58)
If a VCR is connected only with the RF cable, edit "VCR". Set Analogue channel manually Manual Tuning
Note
Fine Tuning
Manual Tuning
Use to make small adjustments to the tuning of an individual programme (affected by weather conditions, etc. ) Set Analogue channel manually after Auto Setup. If a VCR is connected only with the RF cable, select channel position "0".
Analogue Manual Tuning
1 BBC1 Fine Tuning Manual Tuning Sound System Colour System CH33 2 78
SC1 Auto
Advanced
1
41 CH33
SC1: PAL B, G, H / SECAM B, G SC2: PAL I SC3: PAL D, K / SECAM D, K F: SECAM L, L' Select the channel Search and store
search store
Select the channel position
35
Child Lock
You can lock specific channels / AV input terminals and control who watches them. In this case, the schedule information (the date that the
Note
new version can be used) will appear. The update will not start when the TV is set to Off.
41
Advanced
Displaying PC Screen on TV
The screen of the PC connected to the TV can be displayed on the TV. You can also listen to PC sound with the audio cable connected.
To connect PC
p. 54
INPUT TV AV ASPECT MENU N DIRECT TV REC EXIT
1 2
Select the external input
AV
Select "PC"
Input Selection
access
OPTION
RETURN
TEXT STTL INDEX HOLD
AV1 AV2/S COMPONENT PC HDMI TV
select
Corresponding signals p. 60 If "H-freq. " or "V-freq. " is shown in red,
the signals may not be supported.
To return to TV
TV
PC menu setting (changed as desired)
To make settings
Menu Item
R-Gain G-Gain
"How to Use Menu Functions"
to
(p. 24)
Adjustments / Configurations (options)
Adjusts the white balance for red areas Adjusts the white balance for green areas Adjusts the white balance for blue areas Switches the gamma curve (2. 0 / 2. 2 / 2. 5) Press the OK button to reset to the default Advanced PC Settings
Other items
Note
For HDMI-compatible PC, possible to connect to HDMI terminal by using HDMI cable (p. 59).
Picture Setup
Advanced B-Gain PC Settings Gamma
Reset to Defaults Input Resolution Clock
VGA (640 × 480 pixels), WVGA (852 × 480 pixels), Options change depending on signals
Adjusts horizontal position Set to the minimum level if noise occurs
Switches to a wide view
XGA (1, 024 × 768 pixels), WXGA (1, 280 × 768 pixels, 1, 366 × 768 pixels)
H-pos
PC Setup
Adjusts vertical position V-pos
Clock Phase Sync Reset to Defaults
Adjust after Clock adjustment H & V
Eliminates flicker and distortion
Set to the minimum level if noise occurs
Chooses another synchronous signal if the image is distorted (H & V / On Green) : by the horizontal and vertical signals from your PC On Green : by the green signal from your PC (if available)
Press the OK button to reset to the default PC Setup settings
p. 26 - 29
42
How to Use VIERA TOOLS
You can access some special features easily by using the VIERA TOOLS function.
INPUT TV AV ASPECT MENU N DIRECT TV REC EXIT
1 2
Display icons of the feature
TO VIERA OLS
Select a feature
select
OPTION
RETURN
access
TEXT STTL INDEX HOLD
VIERA Link Control
How to Use VIERA TOOLS Displaying PC Screen on TV
3
PROGRAMME
Follow the operations of each feature VIERA Link Control "VIERA Link Control" (p. 52)
When more than two pieces of compatible equipment are connected a selection screen will be displayed. Please select the correct description and access.
Pause Live TV
"Pause Live TV" (p. 51)
TV
To return to TV
EXIT
Slideshow
"Slideshow" (p. [. . . ] Set the sound setting of the connected equipment to
"2ch L. PCM".
Sound is unusual
Check the "HDMI Input" setting in the Sound Menu. 27) If digital sound connection has a problem, select analogue sound
connection. 59)
Pictures from external equipment are unusual when the equipment is connected via HDMI The TV does not switch On The TV goes into "Standby mode"
Check the HDMI cable is connected properly. after analogue
broadcasting ends.
The remote control does not work or is intermittent
Are the batteries installed correctly? [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC TX-L47ET61B
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC TX-L47ET61B will begin.