User manual PENTAX AF160FC

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PENTAX AF160FC. We hope that this PENTAX AF160FC user guide will be useful to you.


PENTAX AF160FC : Download the complete user guide (1755 Ko)

Manual abstract: user guide PENTAX AF160FC

Detailed instructions for use are in the User's Guide.

[. . . ] The AF160FC is a flash system for taking close-up photos of small subjects using a flash to eliminate shadows, allowing you to really enjoy photography. This operating manual is intended mainly for digital SLR cameras using the P-TTL auto flash mode. The provided adapter rings make it available for use with many PENTAX products. Please read this operation manual carefully before using your flash unit. [. . . ] Attach the flash head to the adapter Press the release buttons on the flash head to insert the four mounting tabs (circled in the above diagram) on the inside of the flash head correctly into the groove on the adapter ring (A) or macro adapter (B). After the flash head is attached, pull it lightly to make sure the tabs are inserted into the groove correctly. The flash unit has two modes for adjusting the amount of light produced by the flash: An automatic mode and a manual mode. Full flash output 1/4 of full flash output 1/16 of full flash output Mode and camera settings Auto flash mode The camera must be set to a mode other than manual mode. *If the camera has a flash output compensation function, and flash output compensation is set both on the camera and the flash unit, the flash output compensation amounts will be combined. Taking pictures in auto flash mode Auto flash modes The AF160FC has two auto flash modes. The flash unit communicates with the camera and automatically selects a mode. 2 P-TTL auto flash A pre-flash is discharged before a picture is taken so that the metering sensor in the camera can assess the subject and adjust the output of the flash. This makes it possible to adjust the exposure more accurately than with TTL auto. The table on the following page shows the modes used by different types of cameras. Auto flash operations for various cameras The following table shows the compatibility for when a camera is set to auto flash mode ("AUTO", "+0. Camera Model , , O O Compatibility O : Compatible X : Not Compatible P-TTL auto TTL auto Notes For lenses with an aperture ring, P-TTL auto is used if the lens is set to A, and TTL auto is used for all other settings. P-TTL auto is used for lenses (DA, DA L, and FAJ) that do not have an aperture ring. For lenses with an aperture ring, P-TTL auto is used if the lens is set to A, and full flash is used for all other settings. P-TTL auto is used for lenses (DA, DA L, and FAJ) that do not have an aperture ring. For digital SLR cameras not mentioned above * For DA, DA L and FAJ lenses, which do not have aperture rings, skip to step 4. Confirm that the subject is within the effective flash range and the READY lamp is lit, and then take a picture. * Use the flash head output switch on the flash head output to change the ratio of the flash output as necessary. 31) * Turn on the modeling light to see where shadows will fall before you take a picture. You can adjust where the shadows fall by rotating the flash head after you have changed the flash output ratio. The correct flash output is obtained in P-TTL auto mode only when the flash unit is used with auto-focus lenses. â· Set the aperture of the lens to A when taking pictures in auto flash mode. [. . . ] In any case, however, shipping charges and customs clearance fees are to be borne by the sender. To prove the date of your purchase when required, please keep the receipts or bills covering the purchase of your equipment for at least a year. Before sending your equipment for servicing, please make sure that you are sending it to the manufacturer's authorized representatives or their approved repair shops, unless you are sending it directly to the manufacturer. Always obtain a quotation for the service charge, and only after you accept the quoted service charge, instruct the service station to proceed with the servicing. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PENTAX AF160FC




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PENTAX AF160FC will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.