User manual PIONEER SPEC-1

[. . . ] CAUTION The POWER switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident. To avoid fire hazard, the power cord should also be unplugged from the AC outlet when left unused for a long period of time (for example, when D3-4-2-2-2a_A_En on vacation). [. . . ] Before loading the disc into the player, confirm that the disc is fastened correctly by the adapter's tabs. If an 8 cm disc is loaded by mistake without an adapter, immediately press the EJECT (0) button and remove the disc. If the disc is not ejected the first time the EJECT (0) button is pressed, press the button again. 2 Use only 8 cm disc adapters that feature the ' logo mark (recommended compatible adapters). When mounting the disc to an adapter, confirm that the disc is able to rotate freely, and is not bent or warped. Buttons and controls with the Buttons and controls with the Mark are disabled when the NORMAL/DJ switch is set to NORMAL. When a commercial DVD title is loaded, the initial default cautionary warnings will be displayed first (these warning messages cannot be skipped). When the DVD is recorded with a menu and automatic playback start has not been set, the menu will appear. Depending on the disc, the style, contents, and operation method used in the menu may be different. Basic operations are performed by using the cursor button's four sides ( / / / ) to select options, and by pressing the ENTER button to confirm the selection. For detailed instructions on using a disc's menu, consult the operating guide provided with the disc. [In DJ mode, with jog mode set to VINYL mode OFF] ¶ Placing the player in pause mode enables audible pause (the video image appears as a still image, but audio sound can be heard intermittently). If sound is not desired in this case, lower the audio mixer's output level. [In DJ mode, with jog mode set to VINYL mode ON] ¶ Placing the player in pause mode enables silent pause (still image with no sound). ¶ The TOUCH/BRAKE response dial can be used to modify the disc's deceleration speed (time until playback stops). ¶ The RELEASE/START response dial can be used to modify the disc's playback acceleration time (time until disc reaches full playback speed). [In NORMAL mode] ¶ Placing the player in pause mode enables silent pause (still image with no sound). Hold the TIME MODE/AUTO CUE button depressed for 1 second or more to alternate the auto cue function ON/OFF. ¶ The auto cue function ON/OFF status is memorized even when the player's power is turned off. ¶ The auto cue sensitivity level can be changed if desired. ¶ Either press the TIME MODE/AUTO CUE button or wait 15 seconds and the setting mode will be canceled and the newly selected level will be set. ¶ The newly set sensitivity level is memorized even when the player's power is turned off. [. . . ] Displayed when one-track loop command is received during CD or MP3 playback. displayed when the CD-ROM/CD-R/CD-RW disc loaded contains no MP3 files. Displayed during DVD play in DJ mode, when attempting an operation at a point not supported in DJ mode. Displayed when playing a DVD not recorded in video format (VR format, DVD audio or DVDROM/DVD-R/DVD-RW discs containing no MP3 files, etc. [. . . ]