User manual PIONEER VSX-531B

[. . . ] Book 6 ページ ２０１５年１２月１５日　火曜日　午後３時５０分 TV–1 (ARC TV) / TV–1 (TV ARC) / TV–1 (TV ARC) 1 1 En This describes the connections for a TV that supports the ARC (Audio Return Channel) feature. with this connection , set ARC to ON in “HDMI Setup ( 12)”. 0 Please refer to the TV's operation manual for directions on connections and setup for the TV. Book 7 ページ ２０１５年１２月１５日　火曜日　午後３時５０分 TV–2 (Non-ARC TV) / TV–2 (TV Non-ARC) / TV–2 (TV no ARC) 1 2 3 4 1 4 En This describes the connections for a TV that does not support the ARC (Audio Return Channel) feature. [. . . ] Standby Through When the receiver is in standby, the HDMI input signal selected here will be output to the TV by HDMI. 0 Test tones are emitted by the speakers, and firstly the unit detects the speakers connected and the noise in the environment. After the results of the above measurements are displayed, the test tones are emitted again, and the unit automatically makes settings such as the optimum volume level and the crossover frequency. Book 13 ページ ２０１５年１２月１５日　火曜日　午後３時５０分 Playback Basic Playback Listening To the Radio 1. Press and hold TUNEi or TUNEj (c) for about a second to start automatic tuning to a radio station. Press PRESETi or PRESETj (e) to select a number between 1 and 30 while the preset number is flashing. Press INPUT SELECTOR (a) on the remote control with the same name as the jack to which you connected the player to switch the input. Book 14 ページ ２０１５年１２月１５日　火曜日　午後３時５０分 BLUETOOTH® Playback About Listening Modes The default setting is for the EXT. a En b c b d e f c 13 SN29402357_VSX-531_QSG_EnFrEs_151215. A You can wirelessly enjoy music files stored in a smartphone or other BLUETOOTH-enabled device. 0 Note that connection is not always guaranteed with all BLUETOOTH-enabled devices. Enable (turn on) the BLUETOOTH function of the BLUETOOTH-enabled device. After a short time “CONNECT” is displayed and pairing is completed. Increase the volume of the BLUETOOTHenabled device to an appropriate level. When the input signal is multi-channel, the listening mode switches to Dolby Digital or DTS-HD MasterAudio, for example, to suit the input audio format. When the input signal is 2-channel, you can select the DOLBY PRO LOGIC, DOLBY PLII MOVIE/ MUSIC/GAME and NEO:6 CINEMA/MUSIC listening modes which expand playback to 5. Select STEREO ALC to play at a balanced level even when there are differences in sound level between tracks, for example. AUTO/DIRECT button (b) You can select listening modes such as AUTO SURROUND, DIRECT, and PURE DIRECT that play the sound field according to the number of channels in the input signal. The DIRECT mode bypasses circuits that can affect sound quality, such as the tone control circuits, so you can enjoy even better sound quality. The PURE DIRECT mode allows you to shut down additional circuits and processing that affect sound quality. [. . . ] 0 If the power suddenly turns off: - Check that there are no loose strands of speaker wire touching the rear panel or another set of wires. If so, re-attach the speaker wires, making sure there are no stray strands. - When Auto Power Down is set, the power automatically turns off at the set time. En You can also see which audio format is being input by checking the indicators in the lower part of the display. [. . . ]