User manual PIONEER VSX-D909S
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PIONEER VSX-D909S. We hope that this PIONEER VSX-D909S user guide will be useful to you.
Manual abstract: user guide PIONEER VSX-D909S
Detailed instructions for use are in the User's Guide.
[. . . ] AUDIO/VIDEO MULTI-CHANNEL RECEIVER
VSX-D909S
Operating Instructions
Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
[For U. S. model] IMPORTANT NOTICE
The serial number for this equipment is located on the rear panel. [. . . ] To exit while outputting the TEST TONE press the ENTER button.
S-VIDEO PHONES
VIDEO INPUT L AUDIO R VIDEO
MULTI CH INPUT
TONE
CHANNEL SELECT
LOUDNESS
DIGITAL NR
FL DIMMER
CLASS
BAND
- TUNING +
SPEAKERS
-
BASS
+
- TREBLE +
VIDEO SELCT
TAPE 2 MONITOR
MPX
TUNER CONTROL - STATION + MEMORY
DOWN
UP
MASTER VOLUME
memo If you select SETTING CANCEL no settings are input to the receiver but the screen remains on the TV. To escape the screen you must Select EXIT and press the ENTER button.
3 Select EXIT and press the ENTER button to return to the SYSTEM SETUP MENU.
This completes the speaker setup.
38
Initial Set Up
Dynamic Range Control
This feature makes it possible to enjoy full surround sound effects on Dolby Digital sources even at low volumes. Dynamic range is the difference between the loudest and the softest sounds in any given signal. Compressing the range plays sounds so the quieter ones are audible and the louder ones don't get distorted or become overpowering. This feature only applies to Dolby Digital sources but the MIDNIGHT LISTENING mode accomplishes the same end for a variety of sources (see page 49). If starting fresh, complete steps 1-3 in "Setting Up for Surround Sound" (p. 29) first.
Î
S0URCE MULTI OPERATION SYSTEM OFF USE SETUP RECEIVER
DVD/LD
TV/SAT
VCR1
VCR2
MULTI CONTROL CD CLASS MD/ TAPE1 MPX TUNER BAND TVCONT DIRECT ACCESS
1 Select D-RANGE CONTROL (if continuing from BASS PEAK LEVEL, it will already be selected).
See "Setting Up for Surround Sound" on page 29 if you are unsure how to do this. Press the ENTER button.
Dynamic Range Control
7 ¶ - TUNING + 1 ¡
DTV ON/OFF DTV MENU
3 8 - STATION + 4 ¢ - CHANNEL +
1 4 7
GUIDE +10
2 5 8 0
3 6 9
EXIT ENTER DISC
Select Mode
[OFF]
(For Dolby Digital)
+
TV VOL
TV TV CONTROL TV FUNC
+
VOLUME
SET UP
[EXIT]
REMOTE SETUP INPUT ATT SYSTEM SETUP EFFECT/ CH SEL
MUTE FUNCTION
MENU
+
ENTER
1-3
SIGNAL SELECT DSP STEREO/ DIRECT
· The default setting is OFF. · If listening at loud volumes we recommend turning the Dynamic Range Control OFF.
DIGITAL NR
MULTI CH INPUT
MIDNIGHT
/DTS
LIGHT ADVANCED STANDARD
2 Use the 2 or 3 arrows to choose OFF, MID or MAX. 3 Select EXIT and press ENTER button to return to the SYSTEM SETUP MENU.
If you want to change a setting before proceeding choose a new DYNAMIC RANGE CONTROL setting. You may need to experiment with different Dolby Digital sources before you can use the DYNAMIC RANGE CONTROL setting to suit your low volume listening needs.
AV PRE-PROGRAMMED AND LEARNING REMOTE CONTROL UNIT
39
Initial Set Up
Multi Channel In Setting
If you have a Multi Channel external decoder you can choose whether to have the sound level set to BYPASS, in which case only the main volume can be controlled, or to ADJUST, which means the levels can be reduced in volume. If starting fresh, complete steps 1-3 in "Setting Up for Surround Sound" (p. 29) first.
Î
S0URCE MULTI OPERATION
USE
SETUP RECEIVER
SYSTEM OFF
1 Use the 5¥ buttons to select MULTI CHANNEL IN.
See "Setting Up for Surround Sound" on page 29 if you need more information. This information will be displayed on your TV.
Multi channel in Select mode [Channel Level] [BYPASS] [EXIT]
DVD/LD
TV/SAT
VCR1
VCR2
MULTI CONTROL CD CLASS MD/ TAPE1 MPX TUNER BAND TVCONT DIRECT ACCESS
7 ¶ - TUNING + 1 ¡
DTV ON/OFF DTV MENU
3 8 - STATION + 4 ¢ - CHANNEL +
1 4 7
GUIDE +10
2 5 8 0
3 6 9
EXIT ENTER DISC
+
TV VOL
TV TV CONTROL TV FUNC
+
VOLUME
REMOTE SETUP INPUT ATT SYSTEM SETUP EFFECT/ CH SEL
MUTE FUNCTION
MENU
+
ENTER
1-3
SIGNAL SELECT DSP STEREO/ DIRECT
DIGITAL NR
MULTI CH INPUT
MIDNIGHT
/DTS
LIGHT ADVANCED STANDARD
2 Use the 2¥3 buttons to select the setting you want, BYPASS or ADJUST.
ADJUST: Use the ADJUST setting when you want to be able to control each channel level individually.
AV PRE-PROGRAMMED AND LEARNING REMOTE CONTROL UNIT
BYPASS: This setting is good for getting the cleanest possible signal. In this setting you won't be able to change each channel individually. We recommend using BYPASS and the default setting is BYPASS.
3 Use the 5¥ buttons to select EXIT.
Press the ENTER button. You will return to the SYSTEM SETUP mode.
Multi Channel In Setting Using the Main Unit
You can also use the main unit to change the sound level of the MULTI CH IN. Follow the steps below.
STANDBY/ON
MULTI CH INPUT
1 Put receiver in the STANDBY mode.
INPUT SELECTOR
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
VSX-D909S
Digital Signal Processor
STANDBY/ON STANDBY
DSP MODE
STEREO/ DIRECT
MULTI-ROOM &SOURCE
/DTS
SIGNAL SELECT ADVANCED
STANDARD
CONTROL
MASTER VOLUME
S-VIDEO PHONES
VIDEO INPUT L AUDIO R VIDEO
MULTI CH INPUT
TONE
CHANNEL SELECT
LOUDNESS
DIGITAL NR
FL DIMMER
CLASS
BAND
- TUNING +
SPEAKERS
-
BASS
+
- TREBLE +
VIDEO SELCT
TAPE 2 MONITOR
MPX
TUNER CONTROL - STATION + MEMORY
2 While holding down the MULTI CH INPUT button press the STANDBY/ON button.
The setting will change depending on what state the receiver was previously in. For a few seconds the display will show you which MULTI CH setting you are now in. memo
The default setting is BYPASS.
DOWN
UP
40
Basic Playback
Sound Modes
The four sound modes on the receiver are explained here. These can be turned on from the front panel or from the remote control. These are designed to be used with multi channel surround sound audio/visual sources (like DVDs and LDs). Intrinsic to home theater, these modes can deliver realistic and powerful surround sound that recreates the movie theater experience. You may need to experiment with them to see which settings suit your home system and personal tastes. [. . . ] 75 unbalanced
AM Tuner Section
Frequency Range . . . . . . . . . . . . . . . . . . . . . . . . . . 530 kHz to 1, 700 kHz Sensitivity (IHF, Loop antenna) . . . . . . . . . . . . . . . . . . . . . . . . . 350 µV/m Selectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 dB Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PIONEER VSX-D909S
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PIONEER VSX-D909S will begin.