User manual PIONEER X-EM26

[. . . ] Book 2 ページ ２０１６年８月６日　土曜日　午後３時１４分 IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] If there is no pairing information in the system, such as when using a Bluetooth device for the first time after purchasing the system, the system will automatically switch to pairing mode. ϼFor operating with this unit） Press and hold INPUT until the Bluetooth indicator starts to flash quickly. € This unit switches to pairing mode, and the Bluetooth indicator starts to flash quickly. (Go to step 4） 3 Press / to select [PAIRING], and then press . € This unit switches to pairing mode, and the Bluetooth indicator flashes quickly. You can also use a Bluetooth audio transmitter (sold separately) to enjoy music from devices that do not have Bluetooth functionality. Please refer to the user’s manual for your Bluetooth capable device for more details. € The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. • The Bluetooth wireless technology enabled device must support A2DP profiles. € Connection is not always guaranteed with all Bluetooth enabled devices. 4 Turn on the power to the Bluetooth capable device that you wish to pair with, and perform pairing procedure on it. € This unit will be displayed as “Pioneer X-EM26” on all Bluetooth capable devices that you have. € Please refer to the user’s manual for your Bluetooth capable device for details on when pairing can be performed and the procedures required for pairing. (This unit does not accept any PIN code setting other than “0000”. ) ∫ Remote control operation The remote control supplied with this unit allows you to operate Bluetooth wireless technology enabled devices. • The Bluetooth wireless technology enabled device must support AVRCP profiles. € Remote control operations cannot be guaranteed for all Bluetooth wireless technology enabled devices. 5 Confirm that [BT AUDIO] appeares on the display and the Bluetooth indicator switches from blinking to staying lit. € If the Bluetooth indicator will not switch from blinking to staying lit, the pairing was not completed correctly so please try pairing with the unit again. € If paring has been completed correctly, you need not repeat this procedure again. Even devices that have already been paired with this unit will not connect during pairing mode in the following cases. In such cases, delete pairing history from the Bluetooth wireless technology device and perform pairing again. [. . . ] ˆ Cleaning the product • Unplug the power cord from the power outlet when cleaning this unit. For tough dirt, apply some neutral detergent diluted in 5 to 6 parts water to a soft cloth, wring out thoroughly, wipe off the dirt, and then wipe again with a soft, dry cloth. Also, leaving rubber or vinyl products in contact with this unit for long periods of time could mar the cabinet. ˆ Cleaning the lens • The lens of this unit should not become dirty in normal use, but if for some reason it should malfunction due to dust or dirt, consult your nearest Pioneer authorized service center. [. . . ]