Detailed instructions for use are in the User's Guide.
[. . . ] Digital Surround AV Receiver System
HT-AS710 AV-R710
THIS APPLIANCE IS MANUFACTURED BY:
Instruction Manual
AH68-01854B
Safety Warnings
Precautions
GB
PREPARATION
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN
This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] 3 Press SURROUND button.
Test signal will be automatically output as follows; F. L CEN F. R
OPERATION
from -10 to +10 dB by 1 step.
S. R S. B S. L S. W .
During test signal output, press SELECT (
,
) button to adjust the speaker
output level from -10 to +10 dB by 1 step.
To exit setup mode
Press SETUP/MENU button once time.
"SETUP OFF" appears on the display and test tone stops.
To stop test tone
Press SETUP button once time.
"SETUP OFF" appears on the display and test tone stops.
Using the Test Tone button Press TEST TONE button.
Test signal will be automatically output as follows; F. L CEN F. R S. R
S. B S. L S. W.
During test tone output, press . . . button to adjust the speaker output level from
-10 to +10 dB by 1 step.
32
33
Test tone(cont'd)
Use test tone to check the speaker connection status or level.
GB
To Manually Output Test Tone
REMOTE CONTROL
Press SETUP/MENU button, and then press ENTER 1 button.
"SETUP MODE" appears on the display and goes into Setup Mode.
MAIN UNIT
button. 1 Press SETUPappears on the display and the unit goes into Setup Mode. "SETUP MODE"
button to select the 2 Press press ENTER button. "TEST-T MANU", and then
You can adjust the speaker output level from -10 to +10dB by 1 step. Each time you press
button, F. L CEN F. R S. R S. B S. L S. W will be selected in turn.
2 Press FUNCTION button to select the "TEST-T MANU". 3 Press SURROUND button.
S. W will be selected in turn.
OPERATION
Each time you press this button, F. L CEN F. R S. R S. B S. L
test tone as you want. You can adjust the speaker output
The sound gets quieter at -10dB and louder at +10dB.
4 Press SELECT(
want.
,
) button to set the test tone as you
You can adjust the speaker output level from -10 to +10dB by 1 step. The sound gets quieter at -10dB and louder at +10dB.
To exit setup mode
Press SETUP/MENU button once time.
To stop test tone
Press SETUP button 1 time.
"SETUP OFF" appears on the display and test tone stops.
"SETUP OFF" appears on the display and test signal stops.
Test Tone Output
F. L (front left) : -10 ~ +10dB CEN (centre) : -10 ~ +10dB F. R (front right) : -10 ~ +10dB S. R (surround right) : -10 ~ +10dB S. B (surround back) : -10 ~ +10dB S. L (surround left) : -10 ~ +10dB S. W (subwoofer) : -10 ~ +10dB
34
35
Setting speaker level
You can set the balance and level of speakers.
GB
REMOTE CONTROL
1 Press SETUP/MENU button, and then press ENTER button.
"SETUP MODE" appears on the display and goes into Setup Mode.
MAIN UNIT
button 2 Presspress ENTERto select the "LEVEL SETUP", and then button.
1 Press SETUP button.
"SETUP MODE" appears on the display and goes into Setup Mode.
3 Press
button to select the speaker you want.
Each time you press
button, F. L CEN F. R S. R S. B S. L S. W will be selected in turn.
4 Press . . . button to set the speaker mode.
You can adjust it from -10 to +10dB by 1 step. The sound gets smaller at -10dB and louder at +10dB.
2 Press FUNCTION button to select the "LEVEL SETUP". 3 Presstime you press this button, F. L CEN F. R S. R S. B S. L Each
OPERATION
S. W will be selected in turn.
4 Press SELECT(
you want.
,
) button to set the speaker level
To exit setup mode
Wait for about 5 seconds or press SETUP/MENU button.
"SETUP OFF" appears on the display and Setup Mode is exited.
You can adjust it from -10 to +10dB by 1 step. The sound gets smaller at -10dB and louder at +10dB.
Using the SPK LEVEL button
1 Press SPK LEVEL button to select the speaker you want.
Each time you press this button, F. L CEN F. R S. R S. B S. L
To exit setup mode
Wait for about 5 seconds or press SETUP button.
"SETUP OFF" appears on the display and exits Setup Menu.
S. W SPK LVL OFF will be selected in turn.
2 Press . . . button to set the speaker level you want.
You can adjust it from -10 to +10dB by 1 step. The sound gets quieter at -10dB and louder at +10dB.
Setting Speaker Level
F. L (front left) : -10 ~ +10dB CEN (centre) : -10 ~ +10dB F. R (front right) : -10 ~ +10dB S. R (surround right) : -10 ~ +10dB S. B (surround back) : -10 ~ +10dB S. L (surround left) : -10 ~ +10dB S. W (subwoofer) : -10 ~ +10dB
36
37
Dolby Pro Logic llx mode
This mode provides 6. 1 channel sound from 2 channel sources
GB
REMOTE CONTROL
Press MODE button.
Each time you press this button, CINEMA MATRIX GAME
PL MUSIC will be selected in turn.
MAIN UNIT
1 Press SURROUND button to select "DPLIIx" mode.
Each time you press this button, DPLIIx NEO:6 SFE STEREO
will be selected in turn.
2 Press SELECT(
OPERATION
,
) button.
) button, CINEMA MATRIX GAME PL MUSIC will be selected in turn. Each time you press SELECT ( ) button, MUSIC PL GAME MATRIX CINEMA will be selected in turn.
Each time you press SELECT (
To exit setup mode
Wait for about 5 seconds.
To exit setup mode
Wait for about 5 seconds.
Dolby Pro Logic llx mode
MUSIC : Provides 6. 1 channel surround sound to digital, You cannot use Dolby Pro Logic llx mode for multi channel
analogue or existing stereo sources such as CD, TAPE, FM, TV and stereo VCR. PL : You will experience a surround effect with just the front left and right speakers.
signals such as Dolby Digital and DTS.
Pro Logic works only for PCM audio signals with sampling
frequencies of 32KHz, 44KHz or 48KHz.
Sound will not be output from surround back speaker if
PCM audio signal is mono.
38
39
Setting Dolby Pro Logic llx effect
This function works only in Dolby PRO LOGIC IIx MUSIC Mode.
GB
REMOTE CONTROL
1 Press SETUP/MENU button, and then press ENTER button.
"SETUP MODE" appears on the display and goes into Setup Mode.
2 Press
button to select the " and then press ENTER button.
MODE",
MAIN UNIT
button. button, Each press this
C-WIDTH DIMENSION PANORAMA will be selected in turn.
to set the 4 Press . . . buttonllx effect Dolby Pro Logic you want.
2 Press FUNCTION button to select the "DPLIIx MODE". 3 Presstime you press this button, C-WIDTH DIMENSION PANORAMA Each
OPERATION
will be selected in turn.
To exit setup mode
Wait for about 5 seconds or press SETUP/MENU button.
4 Press SELECT( , you) button to set the Dolby Pro Logic llx effect want.
To exit setup mode
Wait for about 5 seconds or press SETUP button.
"SETUP OFF" appears on the display and Setup Mode is exited.
Using the
1 Press 2 Press
EFFECT button
MODE button to select `MUSIC' Mode. EFFECT button.
"SETUP OFF" appears on the display and Setup Mode is exited.
Each time you press this button, C-WIDTH DIMENSION PANORAMA
will be selected in turn.
3 Press . . . button to select Dolby Pro Logic IIx effect you want.
C-WIDTH : You can set from 0 to 7. [. . . ] Do not use this unless necessary.
MISCELLANEOUS
Do not turn the volume up too high when you use
headphones as It may damage your hearing.
In the 5. 1 channel mode, if you connect
headphones, the "NOT IN USE" message is displayed and sound cannot be heard through the headphones.
56
57
Operating your TV with the remote control
TV Brand Code List
GB
1 2 3 4 5
Brand
Code Number
Brand
LUXMAN LXI (SEARS) MAGNAVOX MARANTZ MATSUI MGA MITSUBISHI/MGA MTC NEC NIKEI ONKING ONWA PANASONIC PENNEY PHILCO PHILIPS
Code Number
018 019, 054, 056, 059, 060, 062, 063, 065, 071 015, 017, 018, 048, 054, 059, 060, 062, 072, 089 040, 054 054 018, 040 018, 040, 054, 059, 060, 075, 101 018 018, 019, 020, 040, 059, 060 003 003 003 006, 007, 008, 009, 054, 066, 067, 073, 074 018 003, 015, 017, 018, 048, 054, 059, 062, 069, 090 015, 017, 018, 040, 048 054, 062, 072, 112, 114, 117, 118 063, 066, 080, 091 015, 018, 059 040 006, 066, 067 017, 048, 056, 060, 061, 075 018, 059, 067, 076, 077 078, 092, 093, 094 003, 019 040 000, 015, 016, 017, 040, 043, 046, 047, 048, 049, 054, 059, 060, 098 019, 061, 065, 101, 102, 103, 104 003, 040, 060, 061 015, 018, 019 015, 057, 064, 101, 105, 106, 115 057, 058 050, 051, 052, 053, 055, 101 003, 040 001 018
Brand
SYLVANIA SYMPHONIC TATUNG TECHWOOD TEKNIKA TMK TOSHIBA VIDTECH VIDECH WARDS YAMAHA YORK YUPITERU ZENITH ZONDA DONGYANG LOWE FINLUX YOKO LOEWE OPTA PHONOLA RADIOLA SCHNEIDER AKAI GRUNDIG BLAUPUNKT SIEMENS CGE IMPERIAL MIVAR SABA BANG&OLUFSEN BRIONVEGA FORMENTI METZ WEGA RADIOMARELLI SINGER SINUDYNE TELEFUNKEN
Code Number
018, 040, 048, 054, 059, 060, 062 061, 095, 096 006 018 003, 015, 018, 025 018, 040 019, 057, 063, 071, 101 107, 109, 110, 111, 113 018 059, 060, 069 015, 017, 018, 040, 048, 054, 060, 064 018 040 003 058, 079 001 003, 054 054 054, 109, 114 054 054, 114 054, 112, 114 054, 112 054 103 108, 109, 113, 119, 120, 121 108 108 113 113 113 114 114 114 114 114 114 114 114 114 116
Press TV button to set the remote to TV mode.
ADMIRAL (M. WARDS) A MARK ANAM
Press POWER button to turn on the TV.
Point the remote control toward the TV.
While holding down POWER button, enter the code corresponding to your brand of TV.
If the code matches the TV's code, the TV will be turned off. If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
If TV is turned on or off when you press the power button of the remote control, the setting is completed.
You can use the TV POWER, VOLUME, CHANNEL, MENU and
Numeric buttons (0~9).
056, 057, 058 001, 015 001, 002, 003, 004, 005, 006, 007, 008, 009, 010, 011, 012, 013, 014 AOC 001, 018, 040, 048 BELL & HOWELL (M. WARDS) 057, 058, 081 BROCSONIC 059, 060 CANDLE 018 CETRONIC 003 CITIZEN 003, 018, 025 CINEMA 097 CLASSIC 003 CONCERTO 018 CONTEC 046 CORONADO 015 CRAIG 003, 005, 061, 082, 083, 084 CROSLEX 062 CROWN 003 CURTIS MATHES 059, 061, 063 CXC 003 DAEWOO 002, 003, 004, 015, 016, 017, 018, 019, 020, 021, 022, 023, 024, 025, 026, 027, 028, 029, 030, 032, 034, 035, 036, 040, 048, 059, 090, 099, 100 DAYTRON 040 DYNASTY 003 EMERSON 003, 015, 040, 046, 059, 061, 064, 082, 083, 084, 085 FISHER 019, 065, 103 FUNAI 003 FUTURETECH 003 GENERAL ELECTRIC (GE) 006, 040, 056, 059, 066, 067, 068 HALL MARK 040 HITACHI 015, 018, 050, 059, 069 INKEL 045 JC PENNY 056, 059, 067, 086 JVC 070 KTV 059, 061, 087, 088 KEC 003, 015, 040 KMC 015 LG (GOLDSTAR) 001, 015, 016, 017, 037, 038, 039, 040, 041, 042, 043, 044, 054, 086
PIONEER PORTLAND PROTON QUASAR RADIO SHACK RCA/PROSCAN REALISTIC SAMPO SAMSUNG
MISCELLANEOUS
SANYO SCOTT SEARS SHARP SIGNATURE 2000 (M. WARDS) SONY SOUNDESIGN SPECTRICON SSS
The remote control may not work on some brands of TVs. Also, some operations
may not be possible depending on your brand of TV.
The remote control will work with Samsung TVs by default.
58
59
Operating your DVD (VCR) with the remote control
VCR Brand Code List
Brand Code Number
043, 106 044, 045, 046 088, 089, 090 001, 002, 003, 004, 005, 033 091 019, 047, 092 048, 093 092, 094, 095 001, 033, 049, 091 011 050 050, 072, 096 051 001, 031, 032, 033, 044, 091 006, 007, 008, 009, 010, 011, 012, 013, 014, 015, 016, 017, 018, 046, 051, 091 011 019, 047, 052, 092 025, 031, 032, 044, 046, 094, 095, 097, 098, 099 009, 048, 053, 054, 055, 100 044 001, 031, 032, 033, 056, 091 059, 060, 061 019 020, 021, 049, 054, 062, 100 051 001, 033, 049, 091 001, 033 025 047, 048, 052, 062, 091, 092 001, 033, 047, 052, 063, 064, 065, 092 047, 050, 052, 092 019, 020, 021, 022, 023, 024, 025, 026, 027, 028, 029, 030, 050 020, 025, 044, 048, 050, 053, 054, 055, 062, 100 072 001, 031, 032, 033, 049, 066, 067, 091 001, 019, 033, 047, 052, 092, 110 025, 050
GB
Brand
MEI MEMOREX MINOLTA MITSUBISHI/MGA MTC MULTITECH NEC OLYMPIC OPTIMUS ORION PANASONIC PENNEY PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND QUASAR RICO RCA/PROSCAN
Code Number
001, 033 001, 025, 033, 054, 091, 100 020, 021, 062 068, 069, 070, 101, 102 072 044, 057, 069 019, 047, 052, 057, 092 049, 091 101 103 001, 004, 033, 049, 067, 091, 107 019, 020, 072 001, 020, 021, 033, 062 001, 033, 046, 049, 091, 094 001, 030, 033, 049, 050, 066, 091 025 049 011 001, 033, 049, 067, 091, 107, 108 036 001, 020, 021, 031, 032, 033, 049, 051, 062, 066, 070, 091, 104 001, 009, 025, 033, 044, 048, 054, 091, 101, 105 000, 006, 031, 032, 057, 058, 071, 072, 073, 074, 075, 076, 077, 078, 079, 080, 081 008, 009, 046, 048, 050, 054, 058, 093, 100 092 006, 051, 054, 057, 069, 070, 100, 101 020, 021, 025 043, 105, 106 096 043, 044, 054, 100, 106 096 034, 035, 036, 037, 038, 039, 040, 041, 042, 082, 083, 084, 085, 086 020 001, 033, 044, 049, 066, 091 044 009
Brand
TASHIRO TATUNG TEAC TECHNICS TEKNIKA TOSHIBA TOTEVISION TAEKWANG UNITECH VECTOR RESEARCH VIDEO CONCEPTS VIDEOSONIC WARDS
Code Number
050 047, 052, 092 044, 047, 052, 092 001, 033, 049, 091 001, 025, 033 006, 051 025, 072 087 072 019 019 072 001, 020, 031, 032, 033, 043, 050, 054, 072, 100, 105, 106, 109 019, 047, 048, 052, 092, 019, 047, 048, 052, 092
1 2 3 4 5
Press DVD button to set the remote to DVD mode.
If you operate VCR, press VCR button to set the remote to VCR mode.
ADMIRAL (M. WARDS) AWIA AKAI ANAM AOC AUDIO DYNAMIC BELL & HOWELL (M. WARDS) BROKSONIC CANON CAPEHART CITIZEN CRAIG CRITERION CURTIS MATHES DAEWOO
Press POWER button to turn on the DVD (VCR).
Point the remote control toward the DVD (VCR). While holding down POWER button, enter the code corresponding to your brand of DVD (VCR).
If the code matches the DVD (VCR)'s code, the DVD (VCR)
YAMAHA ZENITH
DVD Brand Code List
Brand
DENON DOONOON DMTECH FISHER GE HARMAN/KARDON JVC KENWOOD LG MAGNAVOX MITSUBISHI ONKYO OPTIMUS PANASONIC PROSCAN PHILIPS PIONEER RCA SAMSUNG SANYO SONY THETA DIGITAL TOSHIBA YAMAHA ZENITH TAEGWANG PS2 X-BOX APEX MARANTZ
DAYTRON DBX EMERSON FISHER FUNAI GENERAL ELECTRIC (GE) GO VIDEO HARMAN KARDON HITACHI HQ INSTANT REPLAY JCL JCP JC PENNY JVC KENWOOD LG (GOLDSTAR)
Code Number
003, 032 019 017 002 006 012 010, 013 008 001 004 005, 016 004, 014 011 021 006 004, 023 007, 011, 022, 025 006 000, 027 002 015, 020 011 004, 018 009, 033 004, 024 026 028 029 030 031
will be turned off. [. . . ]