User manual SHARP LC-43CFF5111E

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP LC-43CFF5111E. We hope that this SHARP LC-43CFF5111E user guide will be useful to you.


SHARP LC-43CFF5111E : Download the complete user guide (926 Ko)

Manual abstract: user guide SHARP LC-43CFF5111E

Detailed instructions for use are in the User's Guide.

[. . . ] верткой AAC EN  Important safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Please, read these safety instructions and respect the following warnings before the appliance is operated: • To clean the screen of the appliance use only a damp and soft cloth. € Position the TV close to the wall to avoid the possibility of it falling when pushed. € The instructions shown below are a safer way to set up the TV, by fixing it to the wall and will avoid the possibility of it falling forwards and causing injury and damage • For this type of installation you will need a fastening cord A) Using one/both of the top wall-mounting holes and screws (the screws are already supplied in the wall mounting holes) fasten one end of the fastening chord/s to the TV. € The software on your TV and the OSD layout can be changed without notice. [. . . ] Press the [MENU], select "Network ID" and enter the network ID. * - supplied only for models without SCART connector ** - Aviable only for models with Mini Component   1. Optional channel presets DVB-S2*: Select "Satellite" in the "DVB Antenna" in the menu for the optional channel presets. Since selection completed, then the channel list of the exact satellite will be available to be imported into your TV system. TIP: If you are missing channels, the reason for this is likely to be signal strength, you should consider connecting signal booster and re-tuning the TV. * - Available only for TVs with DVB-S tuner Please follow the instructions on last page of this user manual. Getting started - initial set up Insert the batteries supplied into the Remote control. Using the RF cable supplied, connect the TV to the TV Aerial wall socket. For connecting to the Internet with a wired connection connect a Cat 5/Ethernet cable (not included) from the TV to your broadband modem/router. If the TV does not respond to remote control commands, follow the instructions below. Pairing the remote control unit (RCU): a) If the TV turns on automatically and the window "First Time Installation" found appeared on the screen, press and hold for a few seconds green and yellow buttons on the RCU. The power indicator will blink 5 times, that would confirm the pairing of TV and RCU completed. B) If the TV does not automatically turn on, you need to power it on by using of standby key allocated on the TV (but not on the RCU). After TV started up press once again a standby button, then there menu "Pair your remote" will appear. Scroll the cursor down using the buttons CH+/CH, to select "Pair your remote", and confirm it by pressing standby button one more time. Simultaneously press and hold for a few seconds green and yellow buttons on the RCU. The power indicator will blink 5 times, thus confirming the pairing of the TV and the remote control completed. After turning on the TV you will see the menu "First Time Installation". If the menu does not appear, You can recall it by pressing the remote control buttons "Menu", then 8-8-8-8, so this menu window would be re-opened. If you wish to make changes to any of the default settings, use the scroll ▲/▼/◄/► buttons. DVB Antenna - You can choose between Terrestrial (DVB-T/T2), Cable (DVB-C) or Satellite (DVB-S/S2)*. Tunning Mode - Choose if you want to tune only Digital (DTV)  1. [. . . ] Version Info - shows version of TV software Store Mode** - switch ON/OFF shop demonstration mode * - HDMI CEC must be supported by connected device. ** - available only if store mode was selected during first time installation  7 Day TV Guide  Lock TV Guide is available in Digital TV mode. It provides information about forthcoming programmes (where supported by the Digital channel). You can view the start and end time of all programmes and on all channels for the next 7 days and set reminders. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP LC-43CFF5111E




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP LC-43CFF5111E will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.