User manual SMEG 500G

[. . . ] • Do not use abrasive or corrosive detergents on glass parts (e. g. • Always disconnect the appliance from the mains in the event of a breakdown or maintenance, or during cleaning. 18 Instructions 1. 2 Manufacturer’s liability The manufacturer declines all liability for damage to persons or property caused by: • all liability for personal injury or property damage caused by; • non-observance of the instruction manual provisions; • tampering with any part of the appliance; • use of non-genuine spare parts. 1. 4 Disposal This appliance must be disposed of separately from other waste (Directives 2002/95/EC, 2002/ 96/EC, 2003/108/EC). The appliance does not contain substances in quantities sufficient to be considered hazardous to health and the environment, in accordance with current European directives. [. . . ] indicates the general optimum temperature at which to adjust the appliance preferably. • MAX: In this position, the knob indicates the appliance is on MAXIMUM. 21 Description 2. 2 Other parts Lid 2. 3 Available accessories Beer rack It is only fitted for styling purposes, but it can be raised to move beverages inside the refrigerator compartment. Useful to store fruit juices, milk cartons and cans. 22 Use 3 Use 3. 1 Instructions Improper use Risk of damage to the appliance • Do not use sharp objects when removing ice and frost to avoid damaging the appliance's walls. • Do not touch the heating elements on the outside of the appliance. • Organic compounds, acids and essential oils can corrode the seals and plastic surfaces if left in contact with them for extended periods. • Bottles containing strong alcoholic drinks must be tightly closed and stored vertically. 3. 3 First use 1. Adjust the thermostat knob from MIN to MAX to set the desired temperature. The higher the number set, the lower the refrigerator temperature will be. 3. 4 Accessing the refrigerator compartment Raise the appliance lid to access the refrigerator compartment. Inside, you will find a rod on the right-hand side to keep it raised while you move beverages around inside the refrigerator compartment. Move the rod a few centimetres to the left to release the tip of the slot. 3. 2 Preliminary operations 1. Remove any protective film from the outside or inside of the appliance, including accessories. Remove any labels (apart from the technical data plate) from the accessories and shelves. With the lid raised, turn the rod downwards and place the tip onto the metal plate situated to the right of the sliding doors. Slide the tip of the rod all the way to the end of the slot in the plate. 3. 5 Using the accessories Layout of accessories The accessories can be arranged along the purpose-designed guides inside the refrigerator compartment. Beer rack assembly 1. Place the 2 partitions at the rear of the beer rack. 24 Use Sample uses 3. 6 Using the refrigerator compartment Arranging beverages Arrange the beverages, making sure they are sealed tight. This precaution is necessary: • to preserve the aroma and freshness of the beverages; • to avoid any contamination of beverages with odours or tastes from other beverages; • to prevent the humidity level inside the refrigerator from becoming too high, which in some operating conditions (rise in ambient temperature and humidity, more frequent opening of the door) might cause condensation to form on the shelves. Always allow hot drinks to cool to room temperature before putting them in the refrigerator compartment. Bottle rack Beer rack 3. 7 Storage advice • Always check the expiry date on the food packaging. • Remove perishable products from the appliance if you are going away for a long period. [. . . ] Turn the front castors by 90° with the brake levers turned to face the centre of the appliance. Should you need to lift the appliance, with the aid of a second person, grip the wheel arches using both hands. 2. Press the brakes on the front castors down until they click in place. 29 EN Installation Positioning Place the appliance on a stable and level floor. [. . . ]