User manual SMEG B9GMXNL

[. . . ] Contents 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 1. 7 2. 1 2. 2 2. 3 2. 4 2. 5 General safety instructions Identification plate Manufacturer liability Appliance purpose Disposal This user manual How to read the user manual General Description Cooking hob Control panel Other parts Available accessories Instructions First use Using the accessories Using the hob Using the storage compartment Using the oven Programmer clock Cooking advice Instructions Cleaning the appliance Removing the door Cleaning the door glazing Cleaning the inside of the oven Extraordinary maintenance Gas connection Adaptation to different types of gas Electrical connection Positioning 4 5 5 5 5 6 6 2 Description 7 7 7 8 9 9 3 Use 3. 1 3. 2 3. 3 3. 4 3. 5 3. 6 3. 7 3. 8 4. 1 4. 2 4. 3 4. 4 4. 5 4. 6 5. 1 5. 2 5. 3 5. 4 11 11 12 12 14 15 15 17 19 4 Cleaning and maintenance 22 22 22 23 24 24 25 5 Installation 26 26 29 33 34 We advise you to read this manual carefully, which contains all the instructions for maintaining the appliance's aesthetic and functional qualities. For further information on the product: www. smeg. com 3 EN 1 Instructions 4 Instructions 1 Instructions 1. 1 General safety instructions Risk of personal injury • During use the appliance and its accessible parts become very hot. • Keep children under eight years of age at a safe distance if they are not constantly supervised. • This appliance may be used by children aged at least 8 and by people of reduced physical and mental capacity, or lacking in experience in the use of electrical appliances, as long they are supervised or instructed by adults who are responsible for their safety. [. . . ] Programmed cooking Programmed cooking is the function which allows a cooking operation to be started at a set time and then ended after a specific length of time set by the user. Set the cooking time as described in the previous point “Timed cooking”. The sum of the current time plus the pre-set cooking duration will appear on the display. 5 seconds without pressing any key in order for the function to activate. On the display, symbol turns off, symbol flashes and the buzzer sounds. Minute minder timer The minute minder timer does not stop the cooking operation but rather informs the user when the set time has run out. The display shows the digits and the indicator light flashing between the hours and the minutes. 18 Use 2. 5 seconds without pressing any key to finish setting the minute minder. After the minute minder timer has been programmed, the display will go back to showing the current time; to display the remaining time, press . Adjusting the buzzer volume The buzzer volume can be set to 3 different levels. Deleting the set data Press keys and at the same time to reset the programs set. General advice • Use a fan assisted function to achieve consistent cooking at several levels. • It is not possible to shorten cooking times by increasing the temperature (the food could be overcooked on the outside and undercooked on the inside). Advice for cooking meat • Cooking times vary according to the thickness and quality of the food and to consumer taste. • Use a meat thermometer when roasting meat, or simply press on the roast with a spoon. If it is hard, it is ready; If not, it needs another few minutes cooking. Advice for cooking with the Grill and the Fan with grill • Meat can be grilled even when it is put into the cold oven or into the preheated oven if you wish to change the effect of the cooking. • With the Fan with grill function, we recommend that you preheat the oven before grilling. • With the Grill function, we recommend that you turn the temperature knob to the maximum value near the symbol to optimise cooking. 19 EN 3. 8 Cooking advice Use • Foods should be seasoned before cooking. • Use the oven tray on the first bottom shelf to collect juices produced by grilling. Advice for cooking desserts/pastries and biscuits • Use dark metal moulds: They help to absorb the heat better. • The temperature and the cooking time depend on the quality and consistency of the dough. [. . . ] Lubricating the gas taps Over time the gas taps may become difficult to turn and get blocked. Lubrication of the gas taps should be performed by a specialised technician. 30 Installation Gas types 1 Natural Gas G20 G20 20 mbar G20/25 20/25 mbar 2 Natural Gas G25 G25 25 mbar 3 Natural Gas G25 G25 20 mbar 4 LPG G30/31 G30/31 28/37 mbar G30/31 30/37 mbar G30/31 30/30 mbar 5 LPG G30/31 G30/31 50 mbar 6 City Gas G110 G110 8 mbar 7 City Gas G120 G120 8 mbar IT GB-IE FR-BE DE AT NL ES PT SE RU DK • • • • • • • • • • • • • • • • • • • • • • • • • • • It is possible to identify the available gas types based on the country the appliance is to be installed in. Refer to the heading number to identify the correct values in the “Burner and nozzle characteristics tables”. 31 EN Gas types and Countries Installation Burner and nozzle characteristics tables 1 Natural Gas G20 Rated heating capacity (kW) Nozzle diameter (1/100 mm) Pre-chamber (printed on nozzle) Reduced capacity (W) 2 Natural Gas G25 Rated heating capacity (kW) Nozzle diameter (1/100 mm) Pre-chamber (printed on nozzle) Reduced capacity (W) 3 Natural Gas G25 Rated heating capacity (kW) Nozzle diameter (1/100 mm) Pre-chamber (printed on nozzle) Reduced capacity (W) 4 LPG G30/31 Rated heating capacity (kW) Nozzle diameter (1/100 mm) Pre-chamber (printed on nozzle) Reduced capacity (W) Rated capacity G30 (g/h) Rated capacity G31 (g/h) 5 LPG G30/31 Rated heating capacity (kW) Nozzle diameter (1/100 mm) Pre-chamber (printed on nozzle) Reduced capacity (W) Rated capacity G30 (g/h) Rated capacity G31 (g/h) 6 City Gas G110 Rated heating capacity (kW) Nozzle diameter (1/100 mm) Pre-chamber (printed on nozzle) Reduced capacity (W) 7 City Gas G120 Rated heating capacity (kW) Nozzle diameter (1/100 mm) Pre-chamber (printed on nozzle) Reduced capacity (W) AUX 1. 0 72 (X) 400 AUX 1. 0 72 (F1) 400 AUX 1. 0 77 (F1) 400 AUX 1. 0 50 400 73 71 AUX 1. 0 43 (H2) 400 73 71 AUX 1. 0 145 /8 400 AUX 1. 0 135 /8 400 SR 1. 8 97 (Z) 500 SR 1. 8 94 (Y) 500 SR 1. 8 100 (Y) 500 SR 1. 8 65 500 131 129 SR 1. 8 58 (M) 500 131 129 SR 1. 8 185 /2 500 SR 1. 8 175 /1 500 R 2. 9 115 (Y) 800 R 2. 9 121 (0) 800 R 2. 9 134 (F3) 800 R 3. 0 85 800 218 214 R 2. 9 70 (Y) 850 211 207 R 2. 8 260 /3 800 R 2. 8 240 /3 800 UR2 4. 2 75+135 (H1)+(H3) 1900 UR2 4. 2 75+145 (H1)+(H3) 1900 UR2 4. 1 80+125 (Y)+(H3) 1900 UR2 4. 1 46+91 1900 298 293 UR2 4. 2 43+70 (H2)+(S1) 1900 305 300 UR2 3. 8 140+320 1400 UR2 3. 9 130+290 1400 The nozzles not provided are available at Authorised Service Centres. 32 Installation Power voltage Danger of electrocution • Have the electrical connection performed by authorised technical personnel. • The appliance must be connected to earth in compliance with electrical system safety standards. [. . . ]