User manual SMEG DETERLQC2 ISTRUZIONI VARIE

[. . . ] 1A 2. 2 Label elements: Labelling according to the European Directive 67/548/CE (smi) Hazard symbol R-phrases R35 Causes severe burns S-phrases S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice S36/37 Wear suitable protective clothing and gloves DETERLIQUID C2 - 1/7 - Date: 02/07/2014 SS IT Version: 3 SAFETY DATA SHEET S45 In case of accident or if you feel unwell seek medical advice immediately (show the label where possible) Labelling according to Regulation CE n. 1272/2008 (CLP) Pictogram Signal word Danger Hazard statements H314: Causes severe skin burns and eye damage. Precautionary statements P280 Wear protective gloves/protective clothing/eye protection/face protection P310 Immediately call a POISON CENTER or doctor/physician P351 Rinse cautiously with water for several minutes 2. 3 Other hazards: None 3. CAS 1344-09-8 9003-01-07 1310-58-3 Name Sodium silicate Polyacrylate Potassium hydroxide Quantity 15-30% 10-20% 5-15% Labeling Xi R36/38 R36/37/38 C R35, Xn R22 Where R22 Harmful if swallowed R35 Causes severe burns R36/38 Irritating to eyes and skin. [. . . ] Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN374 derived from it. Protection for immersion and splash Material: Lattice and PVC Body Protection Protection clothing. Respiratory protection If product is sprayed in high concentrations or in case of insufficient ventilation adequate masks and filters suitable for dusts/aerosols (P2) are recommended. This recommendation has to be considered as an advice and has to be weighed by an Industrial Hygienist, who knows the specific situation of the use expected by our customers. It must not be interpreted as an approval of a specific scenario of exposure. 9. Information on basic physical and chemical properties a) b) c) d) e) f) g) h) i) j) k) Appearance Odour pH (sol. 1%) Density at 20 ° C Flammability Boiling point Vapour pressure Hydrosolubility Liposolubility Explosive properties Oxidizing properties Physical state Liquid distinctive 11. 0 -12. 0 1. 17-1. 19 g/cm 3 Not applicable ca. 100 ° C Not Available soluble Not Available Not Available Not Available 9. 2. Other information Data not available DETERLIQUID C2 - 4/7 - Date: 02/07/2014 SS IT Version: 3 SAFETY DATA SHEET 10. Stability e reactivity 10. 1 Reactivity No data available 10. 2 Chemical stability Stable under normal conditions (comply with conditions in section 7). 10. 3 Possibility of hazardous reactions The product reacts violently with acids (comply with conditions in section 7). 10. 4 Conditions to avoid No data available 10. 5 Incompatible materials No data available 10. 6 Hazardous decomposition products Upon contact with acids releases toxic gases (Cl2) 11. [. . . ] “Separated from” acids. 851 Y840 14. 7 Transport in bulk according to Annex II of MARPOL 73/78 and Code IBC Non applicabile 15. Regulatory information This safety datasheet complies with the requirements of Regulation (CE) Num. Safety, health and environmental regulations/legislation specific for the substance or mixture Labeling of ingredients according to Regulation CE/648/2004, Annex 7: none 15. 2. [. . . ]