User manual SMEG DOU330X1

[. . . ] USE & CARE GUIDE GUIDE D’UTILISATION ET D’ENTRETIEN GUÍA DE USO Y CUIDADO BUILT-IN OVEN FOUR ENCASTRABLE HORNO EMPOTRADO ENGLISH THANK YOU FOR YOUR TRUST AND FOR BUYING THIS APPLIANCE.    PLEASE READ THIS MANUAL CAREFULLY. IT CONTAINS ALL NECESSARY INSTRUCTIONS TO CONVERT THE GAS SUPPLY OF THIS PRODUCT. FRANÇAIS NOUS VOUS REMERCIONS DE VOTRE CONFIANCE ET DE L’ACHAT DE CET APPAREIL.    S’IL VOUS PLAÎT, LISEZ CE MANUEL ATTENTIVEMENT. IL CONTIENT TOUTES LES INSTRUCTIONS NECESSAIRES POUR CONVERTIR L'ALIMENTATION EN GAZ DE CE PRODUIT. ESPAÑOL    GRACIAS POR LA CONFIANZA QUE HA DEPOSITADO EN NOSOTROS CON LA COMPRA DE ESTE APARATO. CONTIENE LAS INSTRUCCIONES CONVERSIÓN DEL SUMINISTRO DE GAS DE ESTE PRODUCTO. [. . . ] x x Touch [TIME] key until “STOP TIME” will appear in x the display. The control automatically calculates and displays the initial value, adding the cooking time already set to the time of day. x Whenever it’s necessary to check a time value that is not displayed, touch the [TIME] key until the proper writing is displayed to view the desired value for 5 seconds. Example: if the timer value is displayed and you want to check the cooking time, touch the [TIME] key until “TIME” is displayed to view the cooking time for 5 seconds. 15 Use & Care Manual ENGLISH Setting the meat probe options This oven is optionally provided with the meat probe feature to sense the temperature inside meat and stop cooking as soon as the set value is reached. The following modes can be selected to work with the meat probe: CONVECTION BAKE CONVECTION ROAST BAKE Other modes are not allowed to start if the probe is inserted. Once the probe has been inserted in its receptacle and detected by the control, turn the cooking mode knob into a valid position, the PROBE writing appears on the cooking mode display with the selected function. The meat probe standard temperature (170°F) flashes on the clock module for 5 seconds. Using the [INC]/[DEC] keys, it’s possible to change the probe set. The maximum cavity temperature during cooking with meat probe is 475°F. The resolution must be 5°F or 2. 5°C both for set and actual temperature. After 5 seconds the value on the display is accepted and the control starts cooking. The actual probe temperature is now displayed. Touch [INC] or [DEC] once to check the probe set temperature. When it’s flashing touch it further or hold to modify the value. As soon as the set probe temperature is reached, the control sounds an end of cooking tone and stops the oven. Always turn the cooking mode in the OFF position before re-using the oven. The PROBE writing flashes when the mode is not valid for cooking with probe. If the probe is removed during cooking, or in case of a short or open circuit, a fault message will be displayed. Automatic time functions are disabled when using the meat probe, only the timer can work. 16 Use & Care Manual ENGLISH Bake Tips and Techniques Baking is cooking with heated air. Both upper and lower elements in the oven are used to heat the air but no fan is used to circulate the heat. Follow the recipe or convenience food directions for baking temperature, time and rack position. Baking time will vary with the temperature of ingredients and the size, shape and finish of the baking utensil. General Guidelines x For best results, bake food on a single rack with at least 1" - 1 ½” (2, 5 - 3cm) space between utensils and oven walls. Use metal bake ware (with or without a non stick finish), heatproof glass, glass-ceramic, pottery or other utensils suitable for the oven. x Do not use aluminum foil or disposable aluminum trays to line any part of the oven. Foil is an excellent heat insulator and heat will be trapped beneath it. [. . . ] The lights are switched on when the door is opened or when the oven is in a cooking cycle. Each light assembly consists of a removable lens, a light bulb as well as a light socket housing that is fixed in place. Light bulb replacement is considered to be a routine maintenance item. A A A To Replace a Light Bulb 1. In ovens with lateral rack supports, remove them by unscrewing the four screws. [. . . ]