User manual SMEG FR2052P

[. . . ] Optimal appliance performance is obtained at ambient temperatures between +10°C and +38°C. Switching on the appliance Once the power plug is inserted in the mains socket, unless the thermostat (1) is set to symbol the inside light switches on each time the door is opened. Once the temperature has been set – see next chapter – the appliance is ready for use. Adjusting the temperature - To adjust the temperature in the compartment, turn the thermostat control knob: • to lower numbers 1-2/MIN for the LEAST COLD internal temperatures; • to 3-4/MED for a MEDIUM temperature; • to 5-7/MAX for the COLDEST temperature. [. . . ] • Use a spoon handle to remove ice cube trays which stick to the compartment. Do not use sharp or pointed instruments. 12 HOW TO DEFROST AND CLEAN THE APPLIANCE Before carrying out any maintenance or cleaning operations, unplug the appliance from the mains socket. Defrost the freezer compartment when the ice on the walls reaches a thickness of 3 mm. • Remove foodstuffs from the or freezer and turn the thermostat knob to . • The frozen food must be wrapped in sheets of newspaper (or a cover) and kept in a cool place. • Clean the freezer compartment using a sponge dampened in a solution of lukewarm water and/or neutral detergent. Clean the defrost water drain outlet regularly in order to ensure that defrost water is removed correctly. After cleaning, reconnect the appliance to the power supply. Do not use abrasive products. Prolonged disuse. • Leave the doors open to prevent formation of unpleasant odours. 13 TROUBLESHOOTING GUIDE When you hear these noises . . your appliance is alive!!! 1. • It is normal to hear the noise of the refrigerant liquid in circulation. • Do the household electrical system protection devices work correctly?y Perform the checks for point 4, and then: • Disconnect the appliance from the power supply, check the light bulb and, if necessary, replace it with a new one: - traditional light bulb (max 25W) Or - LED bulb (with the same characteristics), only available from the After-Sales Service • Removing the light bulb: Unscrew the bulb anticlockwise as shown in the figure. 14 AFTER-SALES SERVICE Before contacting After-Sales Service: 1. [. . . ] Correct replacement are identified by the colour insert or the colour embossed in words on the base of the plug. Replacement fuse covers are available from your local electrical store. 2) For the Republic of Ireland only The information given in respect of Great Britain will frequently apply, but a third type of plug and socket is also used, the 2-pin, side earth type. 3) Socket outlet / plug (valid for both countries) If the fitted plug is not suitable for your socket outlet, please contact Whirlpool Service for further instruction. [. . . ]