User manual SMEG SIMU524B

[. . . ] € These words mean: DANGER WARNING You can be killed or seriously injured if you don't immediately follow instructions. You can be killed or seriously injured if you don't follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer. [. . . ] After the second signal tone sounds, a timer is automatically activated to keep track of the boiling time. After the third signal tone sounds, the Boiling Sensor function automatically selects a lower power setting to keep the water simmering. While the water is simmering, you may add any ingredients you like, set the timer and change the power setting. NOTE: Changing the power setting or selecting the Pause function during Boiling Sensor function will cancel the function. Melt For Correct Operation of the Boiling Sensor Function: ■■ ■■ ■■ ■■ ■■ WARNING Food Poisoning Hazard Do not let food sit for more than one hour before or after cooking. Do not add salt, condiments or other ingredients until the water reaches the boiling point. Do not change the power setting of the surface cooking area or remove or move the pot. Fill the pot to at least 1/3 full (minimum of 1 qt [1 L]), and do not fill the pot to the brim. Do not use a pressure cooker on the surface cooking area with the Boiling Sensor function selected. €œA” will appear in the display, and the indicator light next to Melt will light. For Optimum Results: ■■ ■■ ■■ Do not use a lid on the pot being used in conjunction with the Boiling Sensor function. OR Touch the Timer “-” keypad to decrease the time in 1-minute increments. To change the time, touch the Timer “+” or “-” keypads. When the countdown is finished, ”00” flashes and a tone will sound. NOTE: When the power is restored after an outage, the timers will no longer be running. 8 Tones Tones are audible signals, indicating the following: ■■ Use flat-bottomed cookware for best heat conduction and energy efficiency. Cookware with rounded, warped, ribbed or dented bottoms could cause uneven heating and poor cooking results. Determine flatness by placing the straight edge of a ruler across the bottom of the cookware. While you rotate the ruler, no space or light should be visible between it and the cookware. Make sure the bottoms of pots and pans are clean and dry before using them. One Tone: ■■ ■■ ■■ ■■ Valid keypad press Slider is moved to “-” power level Slider is moved to “+” power level ■■ Two Tones: ■■ Invalid keypad press Cookware Only ferromagnetic pans can be used for induction cooking. Three Tones: ■■ End of Timer cycle Ferromagnetic Materials Include: ■■ ■■ ■■ Ceramic Glass Cleaning off the induction cooktop before and after each use will help keep it free from stains and provide the most even heating. [. . . ] The electronics require a controlled temperature in order to function reliably. The cooktop is fitted with a fan that runs at various speeds according to the temperature detected. The fan may also continue to run even after the cooktop has been switched off, if the temperature it detects is too high. – â–  ■■ ■■ 11 Please record your model (MOD) and serial number (S/N) below for future reference. [. . . ]