User manual TOPFIELD SBP-2001

[. . . ] Com manuals search engine 1 Chapter 1 Introduction The SBP-2001CI+ digital receiver is fully compliant with the international Digital Video Broadcasting (DVB) standard, and thus is able to receive digital broadcasts of that standard. For its operation you need an antenna, which must be installed appropriately. However, unlike analogue broadcasts, digital broadcasts are not all assigned to their own frequencies; instead, multiple television broadcasts are transmitted through a single frequency. The frequency in digital broadcasting is usually called transponder or multiplex. [. . . ] the number is initially set to ‘0000’ as default. If you wish to block programmes for viewers aged 15 or above, set the Censorship option to 15 (age). Setting it to No block blocks no programme; on the other hand, setting it to Total block blocks every programme. NOTE If a programme has no rating information, your censorship setting will not take effect. If anyone is trying to watch a programme that is of or above the censorship setting, the person has to enter the personal identification number to override. To change the number, select the Change PIN Code menu, then a box pops up, asking a new PIN. Selecting the Access Control menu displays a list of menus that you can lock. If the Time item is set to Locked, you have to enter the PIN when accessing the Time menu. 5 Options for recording To set the options for recording, select the Settings > Recording menu. To enable the time-shift function, you should set the Time Shifting option to anything other than Disable. You will have the latest of the current programme as long as the duration specified at this option. Time padding is the feature of adding extra recording time to the beginning or end of a programme, so that you do not miss any part of the programme. 6 Options for playback To set the options for playback, select the Settings > Playback menu. If you want to play back a recorded file from beginning, set Starting Position option to Beginning. To play back a recorded file from the part where you were watching, set this option to Continuing. If you want to enjoy more levels of playback speed, set the Trick Mode Level option to 2x, 4x, 8x, 16x, 32x, 64x; otherwise, set it to 4x, 16x, 64x. NOTE You can enjoy video files such as DivX with the digital receiver. However, the above options might not be effective depending on the video files to be played. For detailed description on how to play back a video file, refer to §7. When you play back a video file with a subtitle file, if the subtitle does not match the video, then you can synchronise them by adjusting the value of the Sync option. 7 Options for on-screen display 41 size of subtitle by setting the Font Color and Font Size options to one you prefer. 7 Options for on-screen display To set the options for the onscreen display (OSD), select the Settings > OSD menu. [. . . ] 5 Formatting the hard disk If a new hard drive is installed, it must be formatted because you can neither record nor use time-shift with an unformatted hard disk. you can delete permanently all contents stored in a hard drive by formatting it. Select the Installation > System Recovery > Format Hard Disk menu, and then select the hard drive you want to format. NOTE The hard drive on the digital receiver will be formatted in the NTFS file system. [. . . ]